If it is still getting water in the cylinder then it could be coming from the bottom / below the piston. Typically the seal on the water pump will leak allowing water to get into the crankcase. If it gets too much it will get on the cylinder walls and smoke.
what are the cylinder head and crankcase torque specs. for a 2003 Polaris 500
2 qts
The crankcase drain plug on a 2007 Polaris scrambler 500 is hard to locate. However, it is behind the bolt in the skid plate.
Usually the float valve in the carb is bad . The valve will not stop the fuel and it runs down the cylinder into the crankcase .
the mechanical seal on the water pump is out
it is a 300 polaris explorer
The cylinder compression, for your Polaris ATV, is 14 to 1. The cylinder compression usually decreases as the vehicle gets older.
520
2 quarts. Don't forget to drain the crankcase too.
Ooo50521
How do I replace the starter on my polaris 250 4x4 Model number is EC250PF00802151. How do I change the stater on a 99 polaris explorer 4x4
driver side in the middle their will be a 3/4 inwrench nut to drain i out.