0
What else can I help you with?
What is the oil and fuel mixture for a suzuki 5hp 2stroke outboard?
50:1
Compression should a 1999 SUZUKI rm 250 have?
should be in the 175 to 200 psi
How do you clean a carburetor on a 1989 suzuki lt160 ATV?
will your 4wheeler tend to stoll after pushen the coutch to far on it?
What is the compression specs for a 1981 suzuki GS 550 l?
Compression ratio is 8.6:1 Compression test, wet, should put you between, I think, 120 and 170.
What is the stock compression for the suzuki quv 620?
The stock compression ratio for a Suzuki QUV 620 is 10:3:1. Special spark plugs can increase that compression and the horsepower.
What should the compression be on a 1984 Suzuki lt50?
Mine was getting 100. But i dont know how good that is. mines 90
What should the compression be on a suzuki jr 80 2002?
The compression for a 2002 Suzuki JR80 should typically be around 120-150 psi when measured with a compression gauge. It's important to ensure that the engine is at operating temperature and that the throttle is fully open during the measurement for accurate results. If the compression is significantly lower than this range, it may indicate wear in the piston rings or cylinder, requiring further inspection or maintenance.
What range of fork compression and rebound adjustment does a 1996 suzuki rm250 have?
24 clicks of compression
What compression should Suzuki LT80 have?
The Suzuki LT80, an ATV designed for younger riders, typically has a compression ratio of around 6.5:1. This compression ratio is suitable for maximizing performance while ensuring reliability and ease of use for beginners. It's important to maintain this compression to ensure optimal engine performance and longevity. Always refer to the owner's manual for specific maintenance details and specifications.
What is the compression check for a suzuki samurai jeep?
Download the FREE Suzuki Samurai Shop Manual from http://www.suzukiinfo.com/ or visit zukikrawlers.com zn
What should the compression be on your rm125?
The compression for a Suzuki RM125 generally should be between 175 to 200 psi when the engine is in good condition. However, it's crucial to consult the manufacturer's specifications for your specific model year, as tolerances can vary. Regular maintenance, including checking the piston and rings, is essential to ensure optimal compression. Low compression may indicate wear and could require rebuilding the top end.
What is the proper compression for a Suzuki Lt500?
your answer is not easy. do you want ratio or compression pressure. I would guess you are talking pressure, which on a stock engine is around 155 lbs.
