1 Qt. 10w40
they shouldn't.. you need to replace the fork seals
10w40 will be fine.
For a Honda XR200, it's recommended to use a high-quality motorcycle oil with a viscosity of 10W-40 or 20W-50, depending on the ambient temperature and riding conditions. Ensure that the oil is specifically formulated for motorcycles, as it needs to handle wet clutches and maintain engine performance. Always check the owner's manual for specific recommendations and service intervals. Regular oil changes are essential for optimal engine health.
The type of oil that is recommend for a 1989 Honda Accord is 10 W 30. However, if the car is used in colder weather states, 5 W 30 can be used.
Use 10w-40 motorcycle or ATV oil for wet clutches.
On the left side in front of the shifter is the drain plug. My 2002 xr 200 does NOT have a oil filter but an oil screen. Take that out also and clean. Put back in with spring and nut, fill with oil an go play.
i use 20w50 because its thick and lubes real nice
The bottom of the oil pan.
3.7 qt
probably 5w-30
The oil capacity is 3.7 QTS