0
Its right in front of the starter its a 10mm bolt with a phillips if it has coolant coiming out there replace ur water pump shaft seal. should be 10w30 and fill is in the front hard to get to coming up at an angle half way down the motor fill til it runs out u will need a bendable funnel.
What else can I help you with?
How fast is a polaris trail boss 250?
My 98 polaris trail boss does about 55-60mph
Is the 1993 Polaris Trail Boss 350 air cooled?
No, it isn't. The Polaris Trail Boss 350 is a liquid cooled 2-stroke.
What is the compression for a 1993 Polaris 250 Trail Boss?
I have a 1993 Polaris 250 Trail Boss. It won't start. It floods out the carb. Could it be low compression?
What is the year for a polaris trail boss 250 4x4 with vin?
1990 vin location for a trail boss 4wd
How do you change crank case oil 91 polaris 350 trail boss?
There is a large bolt on the bottom of the crankcase, underneath the brake.....that is your drain plug.
Where is the drain plug on a 330 trail boss polaris?
The drain plug on a Polaris 330 Trail Boss is typically located on the bottom of the engine case, near the oil pan. To access it, you may need to remove any protective covers or panels. Always ensure the vehicle is on a level surface and that the engine is cool before attempting to drain the oil. Consult the owner's manual for specific details and diagrams related to your model.
How fast is a polaris 330 trail boss?
I can get to 70-80 MPH
How do you adjust the chain on a polaris trail boss 325?
take out links
Do you mix oil into the gas of a Polaris Trail Boss 350 4-stroke?
No, you don't mix oil into the gas of a Polaris Trail Boss 350 4-stroke. It is a 4-stroke engine, and you do notmix oil with the gas.
Location of fuel filter on polaris 330 trail boss?
The location of the fuel filter on a Polaris 330 Trail Boss is in the fuel line that connects to the fuel pump. The fuel pump is located on the driver's side of the motor.
Does a 250 trail boss Polaris take the same parts as a 325 trail boss Polaris?
The Polaris 250 Trail Boss and 325 Trail Boss are different models, and while they may share some components, many parts are not interchangeable due to differences in engine size, design, and specifications. It's essential to consult a parts manual or a dealer for specific compatibility. Always verify part numbers before making a purchase to ensure proper fitment.
How do you remove chain on 2000 polaris trail boss 325?
The chain on a 2000 Polaris Trail Boss 325 is removed by loosening the retaining bolts and applying tension away from the sprockets. The chain can them be slipped off the sprockets and removed.
