On the oil pan below the engine. Go to GSResources if you need more help.
The Suzuki oil drain plug torque specification is 30 pounds. Over tightening the oil drain plug can cause the oil pan threads to strip.
The size of your mom
remove the drain plug between the exhaust under the motor
The transmission fill plug on a 2000 Suzuki Alto is behind the drain plug. Both the plugs are located underneath the transmission.
17mm
its under the engine
.24 to .31
It is the plug with the number 4 written on on the very bottom of the crankcase.
On the 2001 Suzuki Savage, the drain plug is located on the bottom of the engine, near the center. It is typically a hex-shaped bolt that can be accessed from the underside of the bike. To drain the oil, you'll need to remove this plug and allow the oil to flow out into a suitable container. Always ensure to replace the plug securely after draining.
it is the only one on the oil pan.
no plug on trans pan----u have to drop the pan
The torque specification for the oil drain plug on a 2006 Suzuki Reno is typically around 18 to 22 lb-ft (24 to 30 Nm). It's essential to avoid over-tightening, as this can damage the oil pan or the plug itself. Always use a torque wrench for accurate measurements when securing the drain plug after an oil change.