Counter clock-wise to lossen, clock wise to tighten
Clockwise to screw in, counterclockwise to remove
To take off blades, you generally turn counterclockwise to unscrew them. This is because most blades are designed with a standard threading that requires them to be turned counterclockwise to loosen and remove. Remember to always consult the manual for your specific device for detailed instructions.
I would say counterclockwise to remove it.
All nuts, bolts, and screws, are removed using the counterclockwise method. Clockwise tightens the bolts. Use the saying lefty ( counterclockwise ) loosey, righty ( clockwise ) tighty.
right - CLOCKWISE to install - COUNTERCLOCKWISE to remove
Counterclockwise off. Clockwise on.
If it is a plug -- turn it counterclockwise to remove If it is a "petcock" turn it clockwise to open
counter clockwise. It is almost impossible to remove it with a wrench unless you can keep the engine from turning with it when you try to remove it.
Counterclockwise to remove, clockwise to tighten.
To tighten filter,turn clockwise and to remove,turn counterclockwise.
To remove the pedals from the crank of your bicycle, you will need a pedal wrench or a 15mm wrench. Turn the wrench counterclockwise to loosen and remove the pedals. Make sure to turn the right pedal counterclockwise and the left pedal clockwise.
Lefty loosey, righty tighty. Counterclockwise to remove, clockwise to tighten.