I think they were the same style until 1987 and changed in 1988.
So I think that a side crankcase cover will fit and if I'm not mistaken the VT750 will fit as well.
Hope this helps.
I think any one from 1983-1987 they changed style in 1988. Hope this helps.Oh and 700 and 750 should be same as well.
The slave cylinder is underneath the rear crankcase cover left hand side.
On a 1995 Honda Shadow, the stator is located inside the engine case, behind the left side cover. To access it, you'll need to remove the left side cover and the rotor, as the stator is mounted on the engine's crankcase. It plays a crucial role in generating electrical power for the motorcycle's electrical system. Make sure to follow proper procedures for disassembly and reassembly to avoid damaging components.
The PCV valve is located in the camshaft cover,in the crankcase breather chamber or in the hose which connects the crankcase breather chamber to the intake manifold
Check underneath your left hand side cover. If it is the same as my 750 Shadow it should be underneath that cover.
Look on frame rail under front cover .
under the side cover, just like most bikes
Below the side cover on left side .Has cooling fins. ...
On the left side on top of the crankcase just behind the outermost cylinder head underneath a cover
I think that it is under the r\h side panel cover
To remove the left crankcase from a 1991 Honda FourTrax TRX250X, first, ensure the vehicle is securely elevated and the battery is disconnected. Drain the engine oil and remove any components obstructing access, such as the exhaust and the left side cover. Unfasten the bolts securing the crankcase, carefully noting their locations, and gently pry the crankcase apart, taking care not to damage any gaskets or seals. Finally, lift the crankcase away from the engine, ensuring all internal components are accounted for.
Check your crankcase ventilation, the hose or pcv may be blocked or disconnected.