a. the current and voltage in phase
28 + 56 = 84 ohms
Many circuits have safety devices such as fuse. A fuse contains a substance that melts if it gets hot. if a short circuit happens, the heat causes the fuse to melt. The circuit is broken. because the current stops ,no damage is done.
Yes, in accordance with Ohms law. Accross a given resistance, current will increase directly proportional to the increase in Voltage. Voltage(Volts) = Current (in Amps)x Resistance(in Ohms) You can transpose the formula to find the unknown, given 2 of the values.
Look up "op amp" on wikipedia, there is a good drawing near the bottom right. An op amp contains a differential amplifier as the first stage, but has multiple following stages that provide amplifier near ideal characteristics of high input resistance and low output resistance (it can drive more current than a single dif amplifier stage).
The book, first came on print on 1812.The first name of the book was "Muppal"It contains 133 chaptersArrathupal contains 380 poemsPorutpa contains 700 poemsKamathupaa contains 250 poemsThere are a total of 1330 poems in the ThirukuralIt contains 14,000 words in all.It contains 42,194 letters in total.
Wire. conductors. Wire made into a coil, an inductor.
It does not contain unidirectional outputAnswerA purely resistive circuit is an 'ideal' circuit that contains resistance, but not inductance or capacitance.
When an AC circuit contains both resistance and inductance the current and voltage will be in phase. This means having waveforms that are of the same frequency and that pass through corresponding value.
Just trying to answer a few questions that a can't find the answers for.
It does not contain unidirectional outputAnswerA purely resistive circuit is an 'ideal' circuit that contains resistance, but not inductance or capacitance.
The wheatstone bridge is an instrument used to measure electrical resistance by means of balancing a bridge circuit. The bridge circuit contains two legs, one of which contains the unknown resistance. Variations in wheatstone bridge can be employed to measure inductance, capacitance, and impedance also.
The wheatstone bridge is an instrument used to measure electrical resistance by means of balancing a bridge circuit. The bridge circuit contains two legs, one of which contains the unknown resistance. Variations in wheatstone bridge can be employed to measure inductance, capacitance, and impedance also.
1.cosine 2.exponential 3.min-max value 4.sine
A Maxwell Bridge , also known as the Maxwell-Wien Bridge, is an AC bridge circuit used for measuring an unknown inductance by balancing the loads of its four arms, one of which contains the unknown inductance. A Hay Bridge is an AC bridge circuit used for measuring an unknown inductance by balancing the loads of its four arms, one of which contains the unknown inductance. One of the arms of a Hay Bridge has a capacitor of known characteristics, which is the principal component used for determining the unknown inductance value.
Since a coil contains numerous loops, more of the conductor is affectedÊ by the magnetic field. An increase in permeability of the core results in an increase in the inductance of the coil.
If ther is a resistive load we got curent and voltage in phase. If the load is inductive curent lags behind the voltage. IN THIS CASE THER IS BOTH LOAD THAT MEANS CURENT WILL LAG BEHIND THE VOLTAGE
self-induction."According to Lenz's law,[6]a changing electric current through a circuit that contains inductance, induces a proportional voltage, which opposes the change in current (self-inductance). The varying field in this circuit may also induce an e.m.f. in neighbouring circuits (mutual inductance)." - Wikipedia