0
What else can I help you with?
What are the 5 voltages produced by and ATX power supply?
+12V, -12V, +5V, -5V, +3.3V
How do you change the fuse for 12v power outlet?
The fuse for the power source will be in the fuse block, but your problem may be in the accessery cell phone charger power inverter etc... In which case you can unscrew the end and there will be a round glass fuse. In some cases you will have to take it apart with a screwdriver, but not too many. Good luck, shannon
Can the 2.2 microfared 250V capacitor be charged with 12V dc source?
Yes. The 250 voltage is a not-to-exceed rating.
Can you charge a 12v lawnmower battery with a 12v car battery?
can a 12v lawn mower sealed battery be charged with 12v battery charger use on cars
Direct current 12v to 10v to increase amps?
using a step-up transformer. ****warning***** will stress a power supply
Connect a 12v wire to an amplifier?
Ensure the amplifier is turned off. Connect the positive (+) terminal of the 12V wire to the amplifier's positive terminal and the negative (-) terminal of the 12V wire to the amplifier's negative terminal. Once connected securely, you can then power on the amplifier.
How you convert a power supply into 12v DC?
DC 12V power supply can convert 110/220V AC power source to 12V DC.
How much power is generated by a circuit containing a 12V power source and a 0.72A current?
29
Can you use 12v 600ma instead of 12v 500ma?
Using a 12v 600ma source is allowing 12 volts and 600 amps of power. If the device requires a 12v 500ma source, the larger source is acceptable. Please note that it will only be drawing on 500ma of the available 600ma.
What if your car audio is not turning on and the audio fuse is still good what is the problem?
what is meant by "car audio"? an amplifier will not turn on if it is missing either ground, 12v or 12v accessory turn on. the respective wire colors will be large red wire for 12v battery source, large black wire for -12v ground battery or chassis, thin blue wire for accessory 12v turn on. these wires can be tested for 12v with a multi-meter or a simple test light. a car radio is basically the same wire design for power up, most radios will need 12v to the yellow wire, accessory 12v for the red wire and chassis ground for the black. test these wires the same way the amplifier is tested and repair any wires not functioning correctly. if this does not help, respond with more detailed accurate assessments of problem for further advise.
What kind of resistor do you need for a 12v fan running on 3 Amps powered by a 143 volt power source?
sorry meant to say 14.3 volt power source
Witch voltage produced by an ATX or BTX power supply seldom used?
+12V, -12V, +5V, -5V, +3.3V -5V is seldom used
How does a 12v to 115v converter work?
A 12v to 115v converter, like an inverter, works by converting direct current (DC) from a 12v source (such as a car battery) to alternating current (AC) at 115v. This is typically achieved through electronic circuitry that switches the DC input to create an AC output, allowing you to power AC devices (such as laptops or small appliances) from a DC power source.
What is a 12V auxiliary power outlets?
The 12V auxiliary power outlet used to be called a cigarette lighter with a covering device that could get hot enough to light a cigarette. Since smoking is no longer popular, the lighter was replaced with a plastic cover and it was renamed a "12V auxiliary power outlet".You can plug 12v devices into it for power such as search lights phone chargers etc
Can you use a 14.4V 7.2A DC battery with an amplifier which requires 12V 5A DC?
No, you cannot.
What are five voltages that can be produced by ATX or BTX power supply which one is seldom used?
+12v,-12v, +5v, ,-5v, +3.3v and the one seldom used is -5v
How do you produce 12V adapter?
From what? If you need 12VDC for temporary use, there is a very good 12VDC source in your PC power supply.
