0
Power input to a transformer = (voltage across the primary winding) x (current through the primary)
Power output = (voltage across the secondary winding) x (current through the secondary)
It doesn't matter whether the transformer is used in step-up, step-down or simple isolation.
What else can I help you with?
What is the definition of audio-frequency transformer?
An audio frequency transformer is a transformer designed to operate in the range of frequencies audible to the average human. This range is generally accepted to be from 20 Hz to 20,000 Hz. The usual purpose of an audio transformer is to match impedances between circuit sections. For example: between a microphone and the input of an amplifier, (input transformer), or between the output of an amplifier and the loud speaker. (output transformer).
Why is output dc higher than input ac?
Output power can never be more than input power. With a transformer, it is possible to increase the output current (while decreasing the output voltage), or to decrease the output current (while increasing the output voltage).
No-load and full load transformer?
A: a transformer will follow the rule of input output ratio with no load. As soon as a load is applied there will be changes in the ratio
What is the load side of a transformer?
The load side of a transformer feeds the device, such as a light or motor. It is the output of the transformer. The input, or line side, provides the voltage that is to be transformed, either up or down, to supply the load side.AnswerA transformer's primary winding is connected to the supply voltage, and the secondary winding is connected to the load.
You want to know about the voltage selector circuit using transformer?
the voltage selector circuit is used for converting input electrical energy through the voltage selection circuit,which is arranged within the transformer body with its two ends electric allay connected to an input port and an output voltage connection device must be plugged in a socket portion on the transformer body to initalize a micro control unit through feedback to change a volatage value sent to a voltage transformer unit and in turn change the voltage of output electrical energy until a display device displays an ideal output voltage value. Then, the user removes the connection device, and the voltage value of the input electrical energy is converted into corresponding to the selected
How much output voltage is there if input voltage from a transformer is 32v?
It depends on the turns ratio of the transformer.
When you have 12 coils on the output side of a transformer and 3 coils on the input side with 100 volts output what is the input voltage?
25
How can you see that the transformer is a step down or a step up?
If the primary voltage (input) is less than the secondary (output) then it is a step-up. If the input is greater than the output then it is a step-down transformer.
What does the power relatio0nship state on a transformer?
power in, and power out--input and output.
What is the measure of the output achieved divided by input required?
Productivity is the measure of the output achieved divided by input required.
When will transformer voltage be zero?
A transformer output voltage will be zero when A. The input voltage is zero. B. When the primary (input) wire winding inside the transformer is broken, cut, or burnt out. C. When the secondary (output) wire winding is broken, cut, or burnt out.
What determines the output voltage and the current of a transformer?
The ratio of output windings to input windings determines the ratio of output voltage to input voltage. The ratio of current is the inverse.
What is the Name of the transformer in which the output AC voltage is less than the input AC voltage?
It is a step-down transformer.
Why transformer works on ac not dc give two reasons?
A transformer requires a changing input to generate an output.
What remains unchanged in transformer action?
In a standard transformer, the ratio of input volts to output volts remains constant.
Can you use a step up transformer 110220 with output of 16 kva?
Yes, but your input current is going to be high at 133 amps. The output of the transformer is not going to be 16 KVA, that is the rating of the transformer.
What is the difference between the center tapped transformer and ordinary transformer?
An ordinary transformer has two input/output terminals but a center tapped transformer has 2 input and 3 output terminals. One is taken from the center for a ground connection. This causes it to get 50% of the actual value. And ordinary transformer contains 2 windings. An autotransformer has one.
