0
With great care. The standard light bulb is comprised of a continuous glass housing. The only thing that goes through the glass are the two wires that provide the current pathways to the inside of the envelope where the filament is. To create a hole in a bulb requires a lot of patience, a lot of care and the use of some sort of abrasive tool to grind the hole. Though it might be possible to create a hole by actually drilling it, it is improbable that one could do it without ending up breaking the bulb. The glass isn't that thick, and because the surface is round, smooth and hard, it would be exceedingly difficult to get the drill bit to bite (start). A very small rotary abrasive bit in a dremel tool is probably the best bet. Eye protection is a MUST and hand protection is strongly recommended. Oh, and you are being warned up front: be very careful about what you do with your light bulb with the hole in it. Aiight?
What else can I help you with?
Which was invented first the light bulb or electricity?
electricity because a light bulb needs electricity
Does the middle bulb on the tail light work?
If there is a bulb, it should work.
The power delivered to the light bulb is 23.1 W. What are the two possible resistances of the light bulb?
A: HARD TO SAY because a bulb has different resistance as it warms up
Why does the voltage drop as electricity flows through a light bulb?
Do you mean why is the voltage in a circuit lower after the light bulb than before it? If so, it's because the light bulb filament has electrical resistance. When an electrical current flows through a resistance, there is a voltage drop across the resistance (Ohm's law).More fundamentally, the light bulb is producing light, which is a form of energy. The voltage drop across the light bulb comes from the fact that electrical energy is being turned into light. If voltage didn't drop, you would be producing energy from nothing. Furthermore, if there were no voltage drop, your circuit would behave the same whether you had no light bulbs, one light bulb, or eighteen million light bulbs - something that clearly can't be the case.
Why does the brake light on the integra not light up when you turn on the light but it light up when you brake?
The Integra uses a dual-filament bulb in the tail light, which has one contact for the running light (the lights you turn on at night) and another brighter one for the brake light (only goes on when you press the brake pedal). You have replaced the bulb with the wrong type. You will need a 2057 bulb for the Integra.
What is best known for Thomas Edison?
Thomas Edison is best-known for the light bulb.
Where is the Light bulb list for 2005 cobalt?
2005 Chevrolet Cobalt Light Bulb Replacement GuideHigh & Low Beam Headlamp Light Bulb Size:9007LLParking Light Bulb Size:3157LLFront Turn Signal Light Bulb Size:3157LLRear Turn Signal Light Bulb Size:3057LLTail Light Bulb Size:3057LLStop Light Bulb Size:3057LLHigh Mount Stop Light Bulb Size:912Fog/Driving Light Bulb Size:H11-55WLicense Plate Light Bulb Size:194Back Up Light Bulb Size:921Front Sidemarker Light Bulb Size:194Rear Sidemarker Light Bulb Size:194Map Light Bulb Size:2825LLDome Light Bulb Size:562Step/Courtesy Light Bulb Size:212-2
What type of light bulb is compatible with a blue refrigerator light bulb?
The type of light bulb that is compatible with a blue refrigerator light bulb is typically an LED bulb.
What is the name of the light bulb?
A light bulb
What did Einstein do 100 times to get it to work?
To build the light bulb.
Which came first the telephone or the electric light bulb?
The electric light bulb came first but was patented later that the telephone was.
How can I safely change a light bulb using a light bulb stick?
To safely change a light bulb using a light bulb stick, follow these steps: Turn off the power to the light fixture. Use a stable ladder to reach the light bulb. Attach the light bulb stick to the bulb securely. Unscrew the old bulb and carefully remove it. Insert the new bulb and screw it in place. Remove the light bulb stick and turn the power back on.
What type of light is a light bulb that uses a filament?
A light bulb that uses a filament is also known as an incandescent light bulb.
What is an example of artificial light?
An example of artificial light is a light bulb.
Can a laser be made from a light bulb?
No. Laser light is coherent. Light bulb light is not.
Can a bulb light if electricity doesn't get to the bulb?
No, a light bulb will not light up if electricity does not reach it. Electricity is required to flow through the filament in the bulb to generate light. If there is no electrical current, the bulb will not illuminate.
In 1879 this invention Thomas Edison burned for 13 hours?
The light bulb. The light bulb. The light bulb.
