well its simple whoever asked this question is thick. It gives charge because a battery is the source of electricity therefore firing up the current and electron.
Yes
Charge flow through a circut
You need a source of electrical potential difference, also known as voltage (which is the technical term for what for you call "electric pressure"). The easiest and most common voltage source is a household battery. Hook up the positive electrode of the battery using a conductor (eg. a copper wire) to one end of your circuit and the negative electrode to the other end, and voila, you'll have electric current flowing through your circuit.
Switches, fuses and circuit breakers are examples of some of the electrical parts which can connect or disconnect a circuit to a source of current. A diode does it for alternating current, but only for one half of each cycle. "Connecting" allows an electric current to flow through the circuit. "Disconnecting" stops an electric current from flowing through the circuit.
The electric path which starts from the positive terminal of a cell or battery ends at its negative terminal, without any break, is called closed electric circuit or complete electric circuit. The electric path,which starts from the positive terminal of a cell or battery, is broken at some point, is called open electric circuit or incomplete electric circuit.
you can see that the battery needs battery so that's why
Yes
A circuit with five resistors and a battery is constructed by connecting the resistors in series or parallel to create a closed loop for the flow of electric current from the battery through the resistors. The battery provides the energy for the current to flow through the resistors, which resist the flow of current. The arrangement of the resistors and the battery determines the overall resistance and current flow in the circuit.
A battery will do this, when connected to a closed circuit (for a while).
yes charge flow through the circuit
An electric current needs a closed circuit, which provides a complete path for the flow of electrons. This circuit typically includes a power source, such as a battery or generator, connecting wires, and a load, such as a light bulb or motor, that utilizes the electricity. Without a closed circuit, electrons cannot flow continuously and no electric current is generated.
Charge flow through a circut
When connecting a car battery, a spark may occur due to the sudden flow of electricity between the battery terminals and the cables. This spark is caused by the initial surge of current as the circuit is completed, which can create a small arc of electricity.
Can flow
When connecting the negative terminal of a car battery, a spark may occur due to the sudden flow of electricity between the battery and the vehicle's electrical system. This spark is caused by the completion of the circuit and is a normal part of the connection process.
Current flows from the positive terminal (anode) to the negative terminal (cathode) inside a cell or battery. This flow of electric charge is due to the movement of electrons through the external circuit connecting the two terminals.
A battery contains a charge of electrons. When these electrons leave the battery and travel through a circuit that is described as current.