I like chicken
I really don't know. That's why I searched it. I'm sorry to disturb you just to open this one. :/
No it's more like bittersweet because the guy turns into a bear again and lives happily with the little bear sorry I forgot their names
'Tappings' are externally-accessible electrical connections to the turns of a transformer's (usually high-voltage) winding. This enables the number of turns to be changed, resulting in a change to the transformer's turns ratio and, therefore, to its voltage ratio. Tap changing enables the electricity network company to adjust the turns ratio in response to any excessive voltage reduction resulting from a heavy load.
The reason for conducting transormer turns ratio is to determine if the transformer is a step-up or step-down.AnswerTo determine the turns ratio if the turns ratio is unknown.
it takes 15 turns for it to take effect so I would say 20-25 turns.
He repents.
sorry but its broken
When 2 turns of an inductor or transformer short together.
sorry but you bricked it
Church turns off his short term memory in episode 16 of Recreation
Turns out he isn't. Or wasn't. Sorry
No vitamin has this capability. (Sorry!)
You throw it out. Better safe than sorry.
That number is simply labeled with the unit "ampere-turns".
"The magnetic field produced by each turn interacts with the field of other turns and multiplies the effect, causing the inductance of a coil of wire to increase by the number of turns (N) squared. Therefore, if you double the number or turns, you quadruple the inductance."
The strength of an electromagnet is directly proportional to the number of turns in the coil. Increasing the number of turns in the coil increases the magnetic field strength produced by the electromagnet.
The turns ratio is the number of primary turns divided by the number of secondary turns. This is the same ratio as input current to output current. ie the turns ratio N = I1/I2