boron
Vix Bit is the brand name for a type of door mounting drill bits.
First off, Makita tools are very good. A few bits should come with the drill. It sounds like any standard cordless drill bits would work. You want a main bit that you use primarily. That is about 2 inches long and is a #2 phillips head. Sometimes it has a flat head on the other end which is handy. You may want another two inch bit with a flat head. Buy a good one for a buck extra (Vermont American bit, etc...)so it won't get stripped quickly. You can buy lots of bits that are two inches long, but you want a bit set. It has a bunch of different smaller bits that fit into a 2 inch chank with a socket-type end. There is just a ton of different stuff that you can buy, and you can probably find lots of different kits that contain all of this. You can use drill bits that are made for cordless drills. A normal drill bit won't work. The base end of the bit is made to slide down/ fit into the drill. I have some of those drill bits, and I also have some that make a little divit into the wood so the screw-head fits in nice and snug. Mine are made at Ryobi, and I bought them at the Home Depot. You can buy replacement drill bits to fit into the base. That's pretty handy because you can break a lot of bits without replacing the whole thing.
Bits Of Metal are useful for Tinkering and Trading.
Eight bits to the octet. The values are 0-255.
8 Bits is one Byte. Half of a byte (4 bits) is a nibble.
Boron
Diamond tipped drill bits
Diamond Core Drill Bits are the best for concrete.
These are to drill in glass
A good location to buy Core Drill Bits online is the Diamond Tool Store Website. Core Drill Bits can also be found for sale on the official Amazon website.
Diamonds are widely used in the tool industry to tip drill bits and to edge blades that cut tile, stone and rock.
Diamond hard.
Diamond is harder than any other mineral. A diamond bit can drill through any rock.
Hss drill bits, Titanium coated drill bits and brad point drill bits.
Those types of blades and bits are mainly for cutting tiles and stone.
Diamond by nature is the hardest material, therefore Diamond bits are the "hardest." They are only for ceramics though, for drilling in metal, you would use a cobalt, or carbide drill bit.
Diamond is the hardest natural mineral. Seventy-five percent of diamonds mined are used by industry to maximize the cutting ability of tools and bits.