The total resistance is 5 ohms. Scroll down to related links and look at "Parallel Resistance Calculator".
in series . . . 12 ohms
in parallel . . . 1-2/3 ohms
The net resistance of three resistors in parallel, two of them 20 ohms and one of then 10 ohms, is 5 ohms.
RP = 1 / sum (1 / RN)
Series circuit gives higher resistance compared to parallel circuit.
Not sure what you mean. The equivalent (total) resistance in a parallel circuit is less than any individual resistance.
A parallel circuit is a circuit that takes both legs to make a load.
In principle, it is infinite. I have not connected a parallel circuit in ages.
You can consider a short circuit to be a resistor with R=0 Ohms. It is then clear by the equation for calculation of parallel resistance that the combined resistance of a resistor in parallel to a short circuit is 0. Consider the following example with R1= 1k Ohms and R2= 0 Ohms: Rtotal = R1*R2 / (R1+R2) = R1*0 / R1 = 0 Ohms.
Parallel circuits have a higher current and a lower resistance.
They are not exactly the same. A series circuit is one complete circuit with not other pathways. A parallel circuit is a complete circuit with multiple pathways . The resistance of a parallel circuit is completely different from the resistance of a series circuit. Therefore, this affects the voltage and the current produced,
Series circuit gives higher resistance compared to parallel circuit.
D. The total resistance is equal to the lowest resistance in the circuit
parallel circuit - a closed circuit in which the current divides into two or more paths.The circuits in a parallel circuits there are two or more circuits.
The current through each resistor is equal to the voltage across it divided by its resistance for series and parallel circuits.
There are three disadvantages of parallel circuits. These include the fact that they have complex resistance, voltage that is limited, and a current that varies.
there are three types of circuits. Series,parallel,parallel-series. Series circuits usually are involved with dimming lights, and blown fuses.
5 ohms
There are three disadvantages of parallel circuits. These include the fact that they have complex resistance, voltage that is limited, and a current that varies.
Using a parallel circuit energy can be transferred through a parallel circuit.
A parallel circuit.