0
What are all bolts moves and how do you use them on bolt for the ds?
Wiki User
∙ 11y ago
Ground pound- a button
Laser eye- you walk up to a green lightning bolt and press a button
Attack- y button
Super bark- blow into microphone
Super attack light- tough screen
Zoom zoom- I forgot. (haven't played in a couple years but I remember the rest of everything else.) (:
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
How do you kill diagla?
USE LOADS OF POWERFUL DRAGON MOVES OR 1 HIT KO MOVES
What does the Pokemon Move Last Resort do?
it just a really powerful attack that can only be used after you use all the other moves your Pokemon knows in battle
How do you get the fourth badge in platinum?
Beat Crasher Wake in Pastoria city gym.His Pokemon are Gyarados(use electric and rock moves),Quagsire(use grass moves),and Floatzel(use grass and electric).Beat him and get the Fen badge.
How do you use the heart scale in Pokemon pearl?
you use it on move tutors to teach your Pokemon moves
Can you use Prometheus pellets in a bolt action gas type air rifle?
If they are the proper size.
What are all of Zeus weapons beside the lightning bolts?
he can really use any weapon. but he prefers his symbol of power, the lightng bolt
Can you use Zeus' lightning bolt more than once on howrse?
You can use each lightening bolt only once, but you can use as many bolts on one howrse as you like.
Do bolt remove clockwise or counterclockwise?
All nuts, bolts, and screws, are removed using the counterclockwise method. Clockwise tightens the bolts. Use the saying lefty ( counterclockwise ) loosey, righty ( clockwise ) tighty.
How do you get the oil pan bolt out of the oil pan if the head is stripped off of the bolt?
Use a bolt out the same as an easy out but for bolts & nuts. Craftsman sells a set for about $20.00
How do you put the head bolts back on after changing the head gasket?
Logic says "hell yes" to using new head bolts. Look, you've gone to all the trouble to get there, finish it correctly. Plus, the bolts aren't brutally expensive. HOWEVER: before you pull the head, I'd recommend that you check the head bolt torques first. Do this by a 1/4 loosen, then torque-tighten with your torque wrench. If the bolt won't torque, you have stripped block threads and you'll need to drill and use bolt adapters. Now, the head install what you can do is use a hacksaw to saw off the heads of the used bolts. Next, saw in a slot to fit a slotted screwdriver. 2 bolts will do. Insert the bolts into any 2 bolt holes, loosely. Use then as a guide for your head. Once the head is seated, start a couple of the new bots, then ease our your guide bolts.
What bolt length do you need for min starter350 Chevy?
I thought they use the same bolts as the original.
How much electricity does the lightning bolt at Questacon use?
6,00,000 bolts approx what lightening produce
What size bolt do you use to bolt the oil pan to the plate covering the timing chain?
Oil pan to Timing cover bolts are 8mm to remove them. as for replacing the bolts if they are lost, Metric 6.0 x 1.0 i believe
What is a three bolt puller?
Many wheels and pulleys are very tight on the shaft and must be removed using a "puller". There are several types, some use jaws or clamps, others use bolts. The ones that use bolts come in different configurations with one of the configurations being "three bolt".What that means is that the puller is attached to the pulley or wheel using three bolts, then a center bolt is used to push the puller and wheel/pulley assembly off the shaft. Many wheels and pulleys are very tight on the shaft and must be removed using a "puller". There are several types, some use jaws or clamps, others use bolts. The ones that use bolts come in different configurations with one of the configurations being "three bolt".What that means is that the puller is attached to the pulley or wheel using three bolts, then a center bolt is used to push the puller and wheel/pulley assembly off the shaft.
What bolt size to mount transmission to a Ls motor?
If you don't have the original bolts to see what size they are then you will have to just look at the bolt holes and see the size. Use a bolt and try screwing it into the hole.It should fit snuggly and no play side to side.Length will have to be trial and error.They should go all the way into the hole with at least 8 full turns.And they must clamp up tight. Use only grade 8 bolts.
Why are bolt cutters designed to cut through thick metal?
Heavy-duty bolt cutters are designed to cut through bolts, padlocks, etc. It is quicker to use a bolt cutter than to use a hacksaw, or to use an acetylene burner (acetylene torch) with its cumbersome tanks.
Fixing broken valve cover bolts?
use an extractor to back the bolt out of the hole then replace with new one
