A mono amplifier. You need two for stereo.
a channel refers to the speakers or subs. for example a 2 channel amp can power 2 subs or speakers. a 4 channel will power 4.
1.Small signal amplifier can be designed easily using s parameter while large signal amplifier not.
Easy Question--- One Channel is for the "High End" or Trebble-- The Other Channel is for the "Lower End" or Bass partition of the amplifier-- Careful not to hook up High End speakers to the "Bass Channel, as they will generally POP like the WEASEL!
Disney Channel is on 724 & Disney Channel+1 is on 725
Previous Episode -: 4.25pm - E4 - Sky Channel 136 5.25pm - E4 + 1 - Sky Channel 137 Current Episode -: 6.30pm Channel 4 7.30pm Channel 4 + 1 - Sky Channel 135 Next Episode 7.00pm E4 - Sky Channel 136 8.00pm E4 + 1 - Sky Channel 137 Hollyoaks can also be viewed on 4oD at anytime. www.channel4.com/4od
2
It could be a 2 channel stereo amplifier.
Yes you can bridge this amplifier to a 2 channel at 4 ohm per channel for 200 watts out of each channel.
This is an amplifier that has 4 sperate channels and can be wired in various ways. Usually you would have 1 channel per speaker so you could do 4 speakers with this. However, sometimes it is possible to join the channels together and get more power out of fewer channels - you can get anything from 2-4 channels out of a 4 channel amp.
go ask a mechanic idiot
To bridge a Carver GA-250 power amplifier, connect the positive terminal of the output from one channel (e.g., the left channel) to the positive terminal of your speaker. Then, connect the negative terminal of the output from the other channel (e.g., the right channel) directly to the speaker's negative terminal. Ensure the amplifier is set to "bridge" mode, if applicable, and check the speaker's impedance to ensure it matches the amplifier's bridged output specifications. Always consult the amplifier's manual for specific instructions and safety precautions.
The Kicker 4-channel Car amp has the Kicker logo on it.
a channel refers to the speakers or subs. for example a 2 channel amp can power 2 subs or speakers. a 4 channel will power 4.
Connecting speaker leads to both right outputs, A&B, will only play the right channel of the sound (in mono) when both pairs of speakers, A and B are turned on. This won't damage the amplifier or speakers, but you won't be listening in stereo.
A 2 channel aplifier is an amplifier that can operate two channels. It is basically two 1-channel amplifiers in a single box. This unit is usually intended for operating a left speaker and a right speaker. A channel is the signal/power combination intended for one specific speaker. A 'Stereo' audio system typically has a left channel and a right channel. More advanced audio systems may have separate channels for different types of speakers (midrange, woofer, tweeter, very commonly subwoofer, sometimes supertweeter) or for rear channels (surround.) This sort of setup was modern during the early 90s. A bridged 2 channel amplifier is constructed in such a way that the amplifiers can be set up to operate inline providing the effect of a more powerful one-channel amplifier. If durability is a concern, a bridgeable two channel amplifier used for two channels tends to work well because it's likely to have higher quality or just more diodes so as not to be destroyed too quickly during bridged operation. Using a more powerful amplifier with the gain turned down is also a good idea if longevity is a concern.
90 watts X 4 channel output
Your 4 channel amplifier has neither a 4 ohms nor a 8 ohms output impedance. The output impedance will be smaller than 0.5 ohms. In audio we only use amplifier and loudpeaker bridging. Don't believe the myth of matching. Scroll down to related links and look at "Impedance bridging - Wikipedia".