0
What else can I help you with?
How do you measure inductance?
You can use a LCR (Inductance, Capacitance, Resistance) meter if you can find one.
What is parasitic inductance of capacitor?
A: PARASITIC means like a parasite is there to offset the actual circuitry it can be inductance and/or capacitance A capacitor is usually wound in a coil this coil if frequency is hi enough will behave as a small coil has been added to the circuit. Hi frequency PWM capacitors have indeed four lead to reduce not eliminate this inductance
How component size decreases when frequency decreases?
The impedance of a component (inductor or capacitor) will change with frequency - resistor impedances will not. Inductor impedance - j*w*L Capacitor impedance - 1/(j*w*C) L = inductance, C = capacitance, j = i = imaginary number, w = frequency in radians The actual inductance and capacitance does not change with frequency, only the impedance.
For a transmission line the characteristic impedance with inductance 0.294mHm and capacitance 60pFm?
= Zo = sqrt(L/C) = sqrt(0.294e-3/60e-12) ~ 2214 ohms =
What are the differences between inductance capacitance and resistance in tabular form?
R x(l) x(c) 1 1 1 2 2 2 5 5 5
Power factor is least in capacitance or resistance or inductance?
inductance
How do you measure inductance?
You can use a LCR (Inductance, Capacitance, Resistance) meter if you can find one.
What is Power that is applied to an entire circuit consisting of resistance capacitance and inductance is called?
The unit of power measured is watt, irrespective of resistance, capacitance or inductance of the circuit.
Can capacitance be negative?
no, if it was it would act like inductance.
Does resistor has stray capacitance?
Yes, all electronic components have both stray capacitance and stray inductance.
Why the laser diode has internal capacitance?
All real components have both parasitic capacitance and parasitic inductance.
What is pressure coil capacitance?
The series resistance (swamping resistance and multiplier) in pressure coil circuit has many turns.So in addition to inductance seen before, there are inter-turn capacitance also.If this capacitance effect exceeds the inductance effect, a phase-shift in pressure coil current will cause an error.When pressure coil capacitance roughly equals the inductance, the errors cancel each other.In most cases the inductance is more than the capacitance and thus the shunting capacitor mentioned before will serve the purpose.
What is dynamic impedance?
The impedance of a circuit having an inductance and a capacitance in parallel at the frequency at which this impedance has a maximum value. Also known as rejector impedance.
Elastance is the reciprocal of capacitance so what is the reciprocal of inductance?
electric reluctance
Does capacitance exist for a resistor?
yes, parasitic. there is also parasitic inductance.
What is the main idea in Maxwell bridge?
The main idea of the Maxwell bridge is to measure an unknown inductance by comparing it with a known inductance and resistance in a bridge circuit. By balancing the bridge, the unknown inductance can be determined by the ratio of the two inductances.
Why in hay bridge capacitor is used in series where in maxwell inductance capacitance bridge capacitor is used in parallel?
In the Hay bridge, the capacitor is placed in series to improve the sensitivity of the measurement, allowing for a more accurate determination of capacitance by minimizing errors from stray capacitance. Conversely, in the Maxwell inductance-capacitance bridge, the capacitor is used in parallel to facilitate the comparison of inductance and capacitance directly, enabling a more straightforward calculation of circuit parameters. The differing configurations serve the specific needs of the measurement techniques employed in each bridge design.
