If you are referring to an a.c. current, then the maximum current is the amplitude of its waveform. For a sinusoidal waveform, the amplitude of an a.c. current is its root-mean-square value, divided by 0.707. For example, an a.c current with an rms value of, say, 10 A will have an amplitude of 14.14 A,
Presumably you are referring to an a.c. current?If so, then the average value of an a.c. current is zero so, clearly, you cannot determine its maximum value.However, average current is more-usually applied over half a cycle, in which case, for a sinusoidal current, this value is 0.637 Imax. So the maximum current will be the average value, divided by 0.637.
transformer max earth fault current
It experiences maximum force when it is placed perpendicular to the direction of magnetic field.
I can say it is 29 Amps.But again it depends on the cable length.The more the cable length is the less the current carrying capacity will be.
cat 3, freq and bandwidth 16MHz cat 5, freq and bandwidth 100MHz cat 6, freq and bandwidth 200MHz
The maximum collector current is normally rated to be the current at which the DC current gain (hFE) falls to 50% of its maximum value. The maximum peak current is Page 2 Operation notes Transistors Rev.A 2/7 rated at a value which ensures reliability within the maximum allowed junction temperature.
this is the best current.
Maximum Current draw - 20 (milliamperes)
volts divided by resistance equals maximum amperage (current)
when its is short circuited there will not be any drop and hence the current will b maximum when its is short circuited there will not be any drop and hence the current will b maximum
Current is at maximum
this is the best current.
Maximum negative current is at 270 degrees.
maximum current of a 1hp
Maximum current is defined by the rated KW of the device, say Motor. The motor may not run at its maximum rated capacity all the time. Nominal current is drawn when motor runs at nominal load.
Presumably you are referring to an a.c. current?If so, then the average value of an a.c. current is zero so, clearly, you cannot determine its maximum value.However, average current is more-usually applied over half a cycle, in which case, for a sinusoidal current, this value is 0.637 Imax. So the maximum current will be the average value, divided by 0.637.
maximum current will flow in that line