0
ANSWER Stray capacitance is the capacitance in a circuit not caused by capacitor components. There is a small capacitive effect, often on the order of a few picofarads, between leads of ICs, traces on a PCB, wires in a cable, the power and ground planes in a PCB, etc. In high-speed circuits, stray capacitance can be enough to completely change the operation of a circuit -- even to the point of keeping it from working as designed. Note that capacitor "components" can include PCB traces specifically designed to act as capacitors.
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
How does one reduce stray capacitance?
You can reduce stray capacitance by avoiding having long wires running parallel in circuits. Keep wires as short as possible. Long wires running along each other can exhibit stray capacitance effects. Another way is to cut long leads of components such as capacitors and inductors to make them as short as possible. If best, use SM components, as they have no leads which can cause this stray capacitance effect.
Difference between stray and parasitic capacitance?
Parasitic capacitance is unavoidable and usually unwanted capacity between two or more conductors which exists due to close proximity and which typically causes non-ideal circuit behavior. Stray capacitance, as it is typically thought of, is a type of parasitic capacitance. It is the capacity from a conductor to its surroundings which is the aggregate of the conductors in its environment inversely weighted by the distance to each of the environmental conductors.
Why ordinary diodes dont work properly At high frequencies?
Because of stray capacitance. At very high frequencies, the inter-electrode capacitance has a low enough impedance that the diode no longer cuts off when reverse-biased, there is still significant conduction via capacitive coupling. High-frequency diodes are constructed so as to minimize this capacitance.
Why h parameter are not used for transistor mode at high frequency?
finding h parameters involves open and short circuits which is difficult to obtain at high frequencies due to stray inductance and capacitance
Why RC oscillators are not suitable for high frequency generation?
Because an RC oscillator is affected by stray capacitance in the active components in the circuit. HF oscillators use an LC tuned circuit to define the frequency.
How do you calculate the stray capacitance?
stray capacitance calculation
Does resistor has stray capacitance?
Yes, all electronic components have both stray capacitance and stray inductance.
What is the difference between capacitance and stray capacitance?
Capacitance is an ability to store an electric charge. "If we consider two same conductors as capacitor,the capacitance will be small even the conductors are close together for long time." this effect is called Stray Capacitance.
What is the stray capacitor?
Stray capacitance is undesired capacitance. Any electronic component (wires, resistors, etc.) has SOME capacitance; at high frequencies, this can become significant, becoming a problem for circuit design.
What is the value of stray capacitance?
depends on circuit and its construction.
Effects of stray capacitance in ac fan out?
due to the load gates capacitance values,there is a increased load capacitance on the driving gate
How does one reduce stray capacitance?
You can reduce stray capacitance by avoiding having long wires running parallel in circuits. Keep wires as short as possible. Long wires running along each other can exhibit stray capacitance effects. Another way is to cut long leads of components such as capacitors and inductors to make them as short as possible. If best, use SM components, as they have no leads which can cause this stray capacitance effect.
Does the stray capacitance or the resistance of the monitor cable have the greater effect on the monitor's color?
no
Difference between stray and parasitic capacitance?
Parasitic capacitance is unavoidable and usually unwanted capacity between two or more conductors which exists due to close proximity and which typically causes non-ideal circuit behavior. Stray capacitance, as it is typically thought of, is a type of parasitic capacitance. It is the capacity from a conductor to its surroundings which is the aggregate of the conductors in its environment inversely weighted by the distance to each of the environmental conductors.
What is the effect of stray capacitance in a circuit?
stray capacitance(one that develops between wires ,conductors within the circuit) is obviously not useful as it alters the effective values of circuit components when developed in the oscillators and hence it destabilize the frequency of oscillations Engr.syed mudassir hussain
What is stray capacitance and how is different from ordinary capacitor?
Any two adjacent conductors can be considered a capacitor, although the capacitance will be small unless the conductors are close together for long. This (often unwanted) effect is termed "stray capacitance". Stray capacitance can allow signals to leak between otherwise isolated circuits (an effect called crosstalk), and it can be a limiting factor for proper functioning of circuits at high frequency. Stray capacitance is often encountered in amplifier circuits in the form of "feedthrough" capacitance that interconnects the input and output nodes (both defined relative to a common ground). It is often convenient for analytical purposes to replace this capacitance with a combination of one input-to-ground capacitance and one output-to-ground capacitance. (The original configuration - including the input-to-output capacitance - is often referred to as a pi-configuration.) Miller's theorem can be used to effect this replacement. Miller's theorem states that, if the gain ratio of two nodes is 1/K, then an impedance of Z connecting the two nodes can be replaced with a Z/(1-k) impedance between the first node and ground and a KZ/(K-1) impedance between the second node and ground. (Since impedance varies inversely with capacitance, the internode capacitance, C, will be seen to have been replaced by a capacitance of KC from input to ground and a capacitance of (K-1)C/K from output to ground.) When the input-to-output gain is very large, the equivalent input-to-ground impedance is very small while the output-to-ground impedance is essentially equal to the original (input-to-output) impedance.
Why does the concept of stray capacitance came into electronic circuits?
Any two objects that occupy the same universe have capacitance between them. In electronic circuits components are quite close to each other, and this capacitance is often a nuisance, causing cross-talk, instability, and signal losses.
