0
NLGI 2 grease typically has a density ranging from approximately 0.9 to 1.0 grams per cubic centimeter (g/cm³). This density can vary slightly based on the specific formulation and additives used in the grease. NLGI 2 is a commonly used consistency grade, known for its versatility in various applications, including automotive and industrial uses.
What else can I help you with?
How many cc in a g of grease?
You need to know the density (sometimes referred to as 'specific gravity') of the grease. Grams refer to the mass of product. CC's refer to the Volume of product. Density is Mass per Volume.
Is there a difference between suspension grease and bearing grease?
There is a difference in the two. Suspension grease will be thinner and the bearing grease would be much thicker in density .
What temperature does grease freeze?
The temperature that grease freezes at depends on the density and composition. The more that is in the grease and the thicker it is the lower the freezing point.
What temperature does grease freeze at?
The freezing point of grease can vary depending on the type and composition of the grease. Generally, grease can freeze at temperatures below 32°F (0°C).
What is the density of lubricating grease?
0.88-0.95g/cubic centimeter 880 g/Litre
How do you convert 205 liters of grease into pounds?
litres are a measure of volume while lbs are a measure of weight. you'd need to find the density of the grease to get the weight
How much does a gallon of choice white grease weigh?
A gallon of choice white grease typically weighs around 7.5 to 8.5 pounds, depending on its specific density.
What is the density of axle grease?
If it floats it's less than water (1000 kg/m^3)
Is the design of a grease separator used by chefs based on the property of weight?
No, it is density...Thats what I was told :P
Why does pressure drop when transmitted through a tube of grease but not through a tube of oil?
There will be a pressure drop in both. But there will be more of a pressure drop in a grease tube due to the density of the fluid. If you look at the darcy-weisbach equation density is on the top, therefore the more dense the fluid is the more change in pressure there will be.
What is 1 ml of grease in grams?
The weight of 1 ml of grease can vary depending on the specific type of grease being used. On average, grease has a density of around 0.9 to 1.2 grams per milliliter, so 1 ml of grease would weigh approximately 0.9 to 1.2 grams.
What does a gallon of grease weigh?
Not all types of lithium greases have the same density.For the grease EP-2 an US gallon the mass is 3,293 g.
