There will be a pressure drop in both.
But there will be more of a pressure drop in a grease tube due to the density of the fluid. If you look at the darcy-weisbach equation density is on the top, therefore the more dense the fluid is the more change in pressure there will be.
HECK NO the globe pattern offers the most pressure drop because of friction losses
Yes.
Valves, like other discontinuities, cause a drop in pressure as fluids flow through. The more fluid goes through the valve, the higher the fluid velocities within the valve will be, and the greater the pressure drop. If you are seeing 1.5 to 2 bar drop through the valve, the pressure at the outlet will be 1.5 - 2 bar lower than the pressure at the inlet. If you know the characteristics of the valve, you can figure the pressure drop at any given flow rate, but you need to know the pressure at either the inlet or the outlet to find the pressure at the other end.
Pressure Drop - song - was created in 1970.
The proper way to grease a slip yoke is to unbolt one end of the driveshaft. Drop it an puii the yoke apart. Coat the splines with grease and reinstall.
Use a delta-p gauge
Pressure Drop - album - was created in 1975-11.
Yes. Blood always flows from a higher pressure to a lower pressure, so as the blood moves from the arteries through the capillaries and into the veins pressure drops considerably.
Water creates pressure when it is present in the body. Lowering the amount of water in the blood through diuretics lowers blood pressure. Think of a garden hose with water running through it. If you shut off the end where the spout is, the pressure will increase in the hose, if you open it an let the water run out, the pressure inside the hose will drop. The same principle works in your body. If you have less water in it, by urinating more, your blood pressure would drop.
the leaves turn yellow and drop off.
Pressure drop is a term used to describe the decrease in pressure from one point in a pipe or tube to another point downstream.This occurs when flow resistance resulting in frictional forces acts on the fluid while it is flowing through a tube. The major identifiers of the resistance include fluid viscosity and fluid velocity in the pipe. Pressure drop elevates the same way as shear forces inside the piping network. alliedallcityinc.com
A Low Pressure System