it is used to check or verify how much current pass through the circuit using voltage source.
You need to provide values of resistor and inductor etc to find the phase angle.
lf all resistors are in parallel, yes. If they are in series, not necessarily - this depends on the resistor values (if they are all the same, then yes, if not no).
what does a resistor in an ampliflyer circuit
resistor
Values are principles that are given importance or are considered important in life Goals on the other hand are the objectives one should strive hard to achieve. A standard is a rule or principle that is used as a basis for judgment
Resistor tolerance is how accurate the resistor value is. You may have a 10% tolerance, 820 ohm resistor, which means the actual value of resistance is 820 ohms +/- 82 ohms. If you design a circuit that has very stringent requirements for resistor values, you may need to purchase a resistor that has a smaller tolerance (like 5, 2, 1, .5%). The smaller the tolerance, the more expensive it will be (generally).
Resistor value is defined by the Resistance the resistor offers in Kilo ohms/ohms value given by color codes on the resistor.
those are the fixed resistor...u can't change their values..
values mean CASHMONEY $$$$$$$$$$
It's a resistor that changes values based on the temperature.
nothig
designing circuits by semi-trial and error selection of the right resistor values.
In series, you just add the resistor values together to find the total resistance. In parallel you can use the following equation you can find the total resistance by multiplying the lowest and highest resistor value, the dividing that by the sum of all the resistor values you have in parallel. you could also take the inverse of all the inverses of you resistor values added together.
The importance of Filipino cultural values is that it helps shape the community. These values gives the Filipinos an identity they can associate with.
Ethics
using the color coding method
Type your answer here...