V=IR
R changes as a result of the change in temperature.
Voltage = (current) x (resistance) Current = (voltage)/(resistance) Resistance = (voltage)/(current)
Ohm's LawAnswerIt's not known as anything; it's simply an equation. Ohm's Law describes constant proportionality between current and voltage for certain, but not all, materials (linear or ohmic) -it has nothing to do with this equation.
A: A DELTA transformer is a 1:1 voltage transfer delta to Y IS 1:2 voltage transfer. That is for 3 phase system, If the phases are not exactly matched or the voltage is not exactly right then on a Y setup there will be circulating current at the common node.
the relationship between the deflection of the wire and the ccurrent is when the voltage is 12volt the current become higher.Another AnswerPresumably you are referring to the force on a conductor placed in a magnetic field? In which case, it is equal to the Flux Density of the field (in teslas), the length of the conductor within the field (in metres), and the value of the current passing through the conductor (in amperes).
eat me >>>Corleone<<<
because current is the ratio of voltage and resistance.
Ohm's law gives the relationship between current, voltage, and resistance. The law states that I=V/R, where I is current, V is voltage, and R is resistance. Source: university digital fundamentals
According to ohms law I=V/R; So current is directly proportional to voltage
Ohm's Law: voltage = current * resistance. If resistance is a constant, then voltage is directly proportional to current.
In a capacitor ckt, current will be lead ahead from voltage by an angle 90 degree. Because for a capacitor the relationship between voltage and current is given as v=(jx)i , where v= voltage i= current jx=capacitive reactance
It is called Ohm's Law; it's used a lot in analysis and design of circuits. The relationship is: V=IR (voltage = current x resistance).
That is called Ohm's Law.
The relationship is expressed by Ohm's Law: V=IR (voltage = current times resistance).
Voltage = (current) x (resistance) Current = (voltage)/(resistance) Resistance = (voltage)/(current)
Voltage = (current) x (resistance) Current = (voltage)/(resistance) Resistance = (voltage)/(current)
It's called 'Ohm's Law'.
The unit of power is watts, the unit of current is amps, and the unit of voltage it volts. Power = Voltage X Current Voltage = Power / Current Current = Power / Voltage In electricity, power is symbolized with a P, current with an I, and voltage with a V. The real formula looks like: P = V x I V = P / I I = P / V