Palladium Art 124/674
I have an athletics work watch model number aw60720w and can't get the alarm to shut off.When you have the watch in the regular time mode (nothing flashing) press and hold the lap/reset button; that will display your alarm time, then press the button right above it. You should hear hear a beep and the alarm icon (top left) will disappear.
1. Press CANCEL 2. the WAKE indicator will flash 3. Press WAKE MODE button withint 3 seconds to deactivate the alarm.
SKYSCAN ATOMIC CLOCK model 38229-1 Clock may not reset automatically when after 'SPRING FORWARD' or 'FALL BACK' time changes. How to Reset: Unbend large paper clip and gently insert tip into 'RESET' hole on back of clock for two seconds. Then: 1. press "MODE" (it will show the alarm time) 2. press "ADJUST" (this will switch the time zone from PST to EST) 3. when it is on the desired time zone, press "MODE" to return to the clock. Now place clock near window where southern exposure allows access to satellite. Icon for satellite access should activate (looks like a dish satellite). Allow several minutes for reset.
Google on the web the kenwood site with the model number. Pull down the pdf users manual.
Setting a digital projection alarm clock is best (most easily) done by referring to the owner's manual supplied with the unit. If it is unavailable, go to the manufacturer's web site and look under their customer support offerings or another "appropriate" heading to see if the owners manual can be viewed online. If any are still being sold in nearby stores, get over there and see if a demo unit (a unit that is open) has an owner's manual you can look at. Or, you could experiment. (It is noted that the make and model of the unit were not supplied. That limits the amount of help that can be offered.) Failing that, go to the source. Contacting the maufacturer is relatively easy. All the big one's have 1-800 support and email. Good luck.
Telechron model 7H241 the "Snooz Alarm" 1956
To turn off the alarm on the model 31269 Skyscan atomic clock, press the "ALARM" button until you see the alarm icon disappear from the display. If your clock has a snooze function, pressing the "SNOOZE" button will silence the alarm temporarily, but you'll need to deactivate the alarm entirely by using the "ALARM" button. Make sure to check the manual for any specific instructions related to your model.
To turn off the alarm on the Sio Scan Atomic Clock model 87310, locate the "Alarm Off" button on the clock and press it. This will disable the alarm feature. Additionally, you may need to press and hold the button for a few seconds to ensure the alarm is completely turned off.
To turn off the alarm on the Skyscan clock model 86715, press the "Alarm" button until you see the alarm icon disappear from the display. Alternatively, you can also press the "Snooze/Light" button to temporarily silence the alarm. For a more permanent solution, make sure to adjust the alarm settings to the off position. Always consult the user manual for specific instructions related to your model.
To turn off the alarm on a Sharp atomic clock, locate the alarm switch on the back or side of the clock and set it to the off position. Depending on the model, you may need to press a specific button or sequence to deactivate the alarm. Refer to the user manual for detailed instructions.
To turn off the alarm on a Sony Dream Machine alarm clock, press the "Alarm Reset" or "Alarm Off" button, which is usually labeled on the device. If your model has separate buttons for each alarm, ensure you’re pressing the correct button for the alarm you want to deactivate. Additionally, you can typically turn off the alarm by rotating the alarm dial to the "Off" position. Always refer to your specific model's manual for detailed instructions.
that depends on the brand and model of the laptop, but yes some laptops are equipped with alarms.
Nearly every mobile phone sold both physically in stores and over the internet now has an alarm clock feature. Additionally, older model cordless phones with integrated alarm clocks are available on websites such as Amazon and eBay.
An alarm clock computer program allows the user to set alarms throughout the day. One can attach a music or sound file to the alarm, adjust the settings and even press snooze, just like a normal alarm clock.
The GE Model Number 7-4639A is over 30 years old. This is a blue alarm clock model which features a radio, snooze button and dimmer switch. This clock was put into production in the early 1980s.
To set the atomic clock model 88902, typically you'll need to press and hold the "SET" button until the clock enters setup mode. Then use the arrow buttons to adjust the hours, minutes, and other settings as needed. Refer to the clock's manual for exact instructions on setting up your specific model.
$30 to $50, Talarm,,,There"s a Seth Thomas.com & differant types from grandfather to Alarm Clocks are valuesd. ope this helped