answersLogoWhite

0

To determine the appropriate UPS size for a CT scanner during a blackout, you need to consider the scanner's power requirements, which typically range from 15 to 25 kVA. Additionally, factor in the duration of the backup needed and any other auxiliary equipment that may also require power. A UPS with a capacity of at least 25-30 kVA is often recommended to ensure adequate support and allow for additional devices. It's crucial to consult the scanner's specifications and possibly a professional for precise calculations based on your specific setup.

User Avatar

AnswerBot

1mo ago

What else can I help you with?

Related Questions

What is the device will not protect a computer during a blackout?

Anything that is not a UPS will not protect a computer during a blackout


Can a A scanner be plugged into a ups?

Yes, a scanner can be plugged into an uninterruptible power supply (UPS). This setup helps protect the scanner from power surges and provides backup power during outages, ensuring that you can complete scanning tasks without interruption. However, ensure that the UPS has sufficient capacity to handle the scanner's power requirements along with any other devices connected to it.


What is the UPS electic backup?

The UPS electric backup stores or backup power whenever there is a sudden blackout. It stands for the uninterruptible Power Supply.


Where can one find a UPS shipping calculator online?

UPS charge different costs for shipping depending on the start point and destination of the parcel, as well as its size. A calculator can be found on the UPS website where customers can enter all of the necessary data and receive a quote for the service they require.


What is an inline ups?

HiThere are basically three type of UPS'1. The Standby UPS (often called off-line UPS): this type simply passes on the power it receives from the mains directly to your device during normal operations, in the event of a blackout it transfers to battery supply for your equipment. But there is a millisecond interruption between the switch-over to battery.2. There is also the Line interactive (often wrongly called Inline UPS): this is basically a UPS with a voltage regulater/stabillizer built in. it attempts to correct the incomming voltage from the mains through it to your equipment. it also switches to battery power when there is blackout.3. Finally there is the Online UPS: this type gives only the fully corrected power from the charged batterries to the equipment. it only uses the power to from the mains to charge the barerries, there is no break in power during a blackout. This type of UPS is often regarded as the best, since it offers the best protection to sensitive equipments.hope this helpsrichoracle@yahoo.com


What is the breaker size for the 160KVA UPS?

The breaker size for a 160KVA UPS would depend on the specific model and manufacturer specifications. It is recommended to consult the UPS installation manual or contact the manufacturer to determine the correct breaker size for your specific UPS model.


How much wattage output should a UPS have in the event of a total blackout?

Wattage is determined by multiplying amps by voltage: ergo, a 2.5 amp draw system in a standard 120v (US) home will require a minimum of 300watts, and any good tech will add 20-30% to that figure for a 'safety' cushion; in this case add 90watts for a total of 390watts output needs of the system. Don't forget in this case (total blackout), you need enough wattage to include the monitor along with the system itself. Oh, and do not keep any printers or similar devices on the UPS!


What is the best brand of barcode scanner?

Currently the best brand of barcode scanner in the market is made for UPS by Symbol. Previous models were made by Motorola. It changes a lot according to bidding companies.


Do emgs have to have batteries?

Only the active EMGs require batteries. EMG also manufactures passive pick-ups which do not require batteries.


Can save some power to shutdown computer properly when blackout?

What you're looking for is an Uninterruptable Power Supply, also referred to as a "UPS" or "battery back-up." A home UPS can be purchased from most electronics stores and websites for between one hundred and several hundred U.S. dollars.


How do you determine Uninterrupted Power Supply size?

The load size in watts is what determines the size of UPS needed. Add up all of the load wattages that you would like to have an uninterrupted power supply. Some UPS units are rated in VA output, for the purposes of this calculation VA is the same as watts. There are many UPS calculators on line if you need any help deciding what to connect to it. Remember the larger the UPS the more the cost is going to be. Read the discuss page for calculator.


Why can't someone who is strong do pull-ups?

Strength alone is not the only factor needed to do pull-ups. Pull-ups require a combination of strength, technique, and coordination. If someone who is strong lacks the necessary technique or coordination, they may struggle to perform pull-ups effectively.