0
Who can use a sluice box for searching for gold in British Columbia Canada?
Wiki User
∙ 7y agoWant this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
Who made the Jal Mahal?
1. In the past, at the location of the lake, there was a natural depression where water used to accumulate. During 1596 AD, when there was a severe famine in this region there was consequent acute shortage of water. The then ruler of Ajmer was, therefore, motivated to build a dam to store water to overcome the severe hardships caused by the famine to the people inhabiting the region. A dam was constructed, initially using earth and quartzite, across the eastern valley between Amer hills and Amagarh hills. The dam was later converted into a stone masonry structure in the 17th century. The dam, as existing now (see picture), is about 300 metres (980 ft) long and 28.5-34.5 metres (94-113 ft) in width. It is provided with three sluice gates for release of water forirrigation of agricultural land in the down stream area. Since then, the dam, the lake and the palace in its midst have undergone several rounds of restoration under various rulers of Rajasthan but the final restoration in the 18th century is credited to Jai Singh II of Amer. During this period, a number of other historical and religious places, such as the Amer Fort, Jaigarh Fort, Nahargarh Fort, Khilangarh Fort, Kanak Vrindavan Valley were also built in the vicinity of the lake. All these places are now linked under a tourist corridor of road net work.[5][9]2. Ajmer (Ajaya-meru in Sanskrit) was founded in the late seventh century by Dushyant Chauhan. He established the Chauhan dynasty which continued to rule the country while repeated waves of Turkish invasions swept across India. Ajmer was conquered by Muhammad of Ghor, founder of theDelhi Sultanate, in 1193. Its internal government, however, was handed over to the Chauhan rulers upon the payment of a heavy tribute to the conquerors. Ajmer then remained feudatory to Delhi until 1365, when it was captured by the ruler of Mewar. In 1509 Ajmer became a source of contention between the Maharajas of Mewar andMarwar, and was ultimately conquered by the Marwar ruler in 1532. Ajmer was conquered by theMughal emperor Akbar in 1559. It continued to be in the hands of the Mughals, with occasional revolts, until 1770, when it was sold to theMarathas. From that time up to 1818 Ajmer was the scene of an ongoing struggle, being seized at different times by the Mewar and the Marwar maharajas, from whom it was often retaken by the Marathas. In 1818 the Marathas sold Ajmer to the East India Company for 50,000 rupees. Since then Ajmer has enjoyed stable governance, although during the 1857 War of Independence some Indian sepoys at the garrison in the nearby town of Nasirabad joined the revolt. Under the British Raj, Ajmer was governed by an Agent to the Governor General overseeing Rajputana. After independence in 1947, Ajmer retained its position as a centrally administrated state under a Chief Commissioner for some time. Ajmer was eventually merged with the State of Rajasthan.
Gate valve manufacturer in India?
Specialityvalve is one of the biggest producer and supplier of Gate valve Manufacturer in India. Gate Valve is a control valve that either allows the fluid flow or stops it depending upon our use. It is a most common valve for water valve systems. It is a linear motion valve that starts or stops the flow. It got its name from the element sliding into the flow stream to provide shutoff, hence acting like a gate. Thus it is used either in the fully closed or fully open positions. Gate valves require very little space along the pipe axis and hardly restrict the flow of fluid. When the gate is fully opened it enables the gate valve to offer straightway flow with very little pressure drop. Gate Valves are also called as Sluice Gate Valve. Automated Gate Valve also exists which are either electric or pneumatic actuator, but as manual gate valve are cost effective hence it is affordable and as gate valves are used lesser. Gate valves should not be used for regulation or throttling of flow because accurate control is not possible. Components of Gate Valve ● Body ● Bonnet ● Body Seat ● Stem Nut ● Yoke Nut ● Stem ● Handwheel ● Gasket Working of Gate Valve The main three components of Gate Valve are: body, bonnet and stem When the handwheel is rotated which rotates the stem and due to it there is vertical movement of the gate via threads. They are considered multi-turn valve as it requires more than 360 degree to fully open the gate. When the gate is lifted from the flow path, it is open and when it returns it is closed and hence the flow is stopped. Types Knife Gate Valve Wedge Gate Valve Parallel Slide Gate Valve Slab Gate Valves Pressure Seal Gate Valve Flat Gate Valve Below Seal Gate Valve Forged Gate Valve Advantages • Have low friction • They provide laminar flow • They help to reduce energy and low cost of ownership • There is small flow resistance • Structure length is relatively short Industries ● Oil and Gas ● Automotive ● Marine ● Chemical ● Petrochemical Description Available materials: SS304, SS904, SS904L, SS316, Aluminium Bronze, Monel, Bronze, Brass, Duplex steel, Inconel, Titanium, WCB, CF8, CF8M, CF3, CF3M, WC1, WC6, WC9, Cast iron, SPUER DUPLEX Size: 1/2″- 64” Class: 150 to 2500 Nominal Pressure: PN10 to PN450 Operations: Hand Wheel operated Gate valve, Gear operated Gate valve, Electric actuated Gate valve and Pneumatic Actuated Gate valve Ends: Flanged(FF,RF,RTJ), Buttweld, Socket weld, Threaded Standards: API607, DIN, BS, ANSI, AWWA, ASME, API6D With an experienced technical team, Specialityvalve provides best Gate Valve Manufacturer in India.
Can a sluice box be used in British Columbia?
yes
What is sluice in a sentence?
The sluice was broken.
What is bathroom sluice?
What is a bathroom sluice
Write a sentence About sluice-?
Writing he word sluice in a sentence is easy. You can write " I can put a sluice in the pool".
What is a sentence with Sluice box in it?
No riding the sluice box!
What is Seaton Sluice's population?
The population of Seaton Sluice is 3,081.
When was Bull Sluice Lake created?
Bull Sluice Lake was created in 1904.
When was Ljubljanica Sluice Gate created?
Ljubljanica Sluice Gate was created in 1944.
When did Bull Sluice Railroad end?
Bull Sluice Railroad ended in 1904.
When was Bull Sluice Railroad created?
Bull Sluice Railroad was created in 1902.
When was Sluice Boxes State Park created?
Sluice Boxes State Park was created in 1970.
What is an antonym for the word aqueduct?
race,channel, chute, watercourse, sluice, sluice way, spillway.
