Battery cells are conneted in series. Each cell of a 12v battery averages 2.1v when charged. SERIES 2-4-6-8 and so on
. There is an AA battery (technically it is a cell, not a battery) that is part of the series D, C, AA, AAA, AAAA. There are holders which hold 6 AA cells in series, creating a nominal voltage of 6 x 1.5 equals 9 volts, but with much more capacity and current capability then a nine volt battery.
It depends on what the 6 cells are, but the battery voltage is just 6 times the cell voltage. In a car battery (lead-acid cells) - 12V In a dry-battery (zinc-carbon cells) - 9V
AnswerAccording to WikiPedia (http:/en.wikipedia.org/wiki/Rechargeable_battery), the nominal cell voltage of a Lead Acid wet-cell battery is 2.1 volts, this implies there are 6 cells in a 12 volt Lead Acid wet-cell battery.
Strictly speaking, your regular cylindrical D battery isn't a battery, but a cell.A battery is when you string several cells together.And cells and batteries always give DC - direct current.So it doesn't matter how many you stack together, you won't get any AC, alternating current out of them anyhow.Easiest way to 120VAC is probably to make a 12V battery out of eight D cells, and then run a 120V inverter from them.Inverters are often used in cars, RVs and such to provide AC power from a DC source. Don't expect the battery to last very long though.
Usually, overcharge, sometimes overdischarge. Check the alternator - the regulator is probably shorted.
Sereies, with each cell about 2.2volts
A battery is a device that converts chemical energy into electrical energy. A group of voltaic cells connected together in series or parallel form a battery.
Series.
You would get a high circulating current through both cells, possibly enough to do significant damage to both the cells and to you, depending on the capacity of the cells. Technically, they would actually be connected in series, not parallel!
You would connect them in parallel to increase the amerage. If you connect them in series it would increase the voltage. Connected in series-parallel would increase both voltage and amerage.
In electronics circuits current is common in series circuits and voltage is common across parallel circuits. LEDs in series draw less current, but require more voltage. Total power remains the same until multiple drivers are introduced in a parallel configuration.
4.5 volts in series; 1.5 volts in parallel.
Battery Pack.
as the given cells have the same current flowing in through them (current flowing through the cells connected in series is equal to the current flowing when connected in parallel ) equate the formula's of cells connected in series and cells connected in parallel.thus by equating we get the value of the internal resistor as 2 ohms.
Twelve volt batteries contain a series of 6 cells in the series.
Total voltage output of 5 2v cells connected in series would be 10v
The EMF of a battery made up of cells in series is equal to the sum of the EMFs of the individual cells. When cells are connected in series, their voltages add up. For example, if you have two 1.5V cells in series, the total EMF of the battery would be 3V.