0
Brake lights hazards and blinkers aren't working The bulbs flasher and fuses all seem to be good anyone know why the lights don't seem to be working on your 1996 jeep Cherokee sport 2wd?
Wiki User
∙ 15y ago
might have a short in the wiring to the light socket!! same happen to me...
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
What would make the turn signal and hazards on a 2000 grand Cherokee stop working I couldn't find any blown fuses any ideas?
Blown bulbs not pulling enough current to cause flashers to operate. Check your bulbs...
On a 1987 Jeep Grand Cherokee what could cause the blinkers to stop working?
Check the Flasher, its usually located under the dashboard on the drivers side. its the thing that makes the clicking noise when you use your turn signals. Go to your local auto parts store and tell them about your blinker not working, they can help you get the correct flasher and tell you where its located. Be aware some vehicles have two of them. If this isn't your problem, make sure all your bulbs are good, all the fuses are good and if that doesnt work call a mechanic because it could be the blinker stalk ( the thing you pull on when you use your blinker) or a wiring problem
Front wipers will not work ac not working radio not working was working before key got stock put new steering column in and plugged in all wires and the blinkers don't work is a 1994 jeep please help?
You might want to check all the fuses.
What would cause the drivers window in your 99 jeep grand Cherokee to grind and then stop working?
It could be that the window motor has stopped working.
What would cause a fuel gauge to stop working on a jeep grand Cherokee 1999?
Bad sending unit in tank.
How do you fix a car blinker that is not working but the hazards are working fine?
Check/change the fuse associated with the blinkers.
1991 Toyota corolla front blinkers and hazards not working but my back blinkers and hazards are working all other lights are good and working my fuses are good?
Change front light bulbs
Why is your blinkers and hazards not working?
It may be a bad fuse.... Try that.
Blinkers stopped working?
Replace the Turn Signal Flasher Relay.
What would cause blinkers on a 1996 dodge ram to stop working even though the fuses and the hazards work and replaced the flasher fuse to?
I have a 1996 D R and have the same problem. Apparently the flasher switch needs to be replaced.
The blinkers in my 1977 Ford F-250 stoped working why?
try replacing the flasher unit for the blinkers its a 3 dollar part
Why are your blinkers not working on your 1993 Chevy 1500?
Most likely you have a flasher that needs to be replaced.
2000 buick lesabre blinkers not working?
Blown fuse/? blown bulbs /?bad flasher.
1998 Ford Contour blinkers have stopped working changed flasher still not working what is the next step?
check your fuses
Why your blinkers stop working on your 04 Monte Carlo?
you probably need a new turn signal flasher .
What causes the Blinkers to stopped working in a 2001 grand am?
There could be numerous problems that may cause this fault. Personally, my blinkers started going out (working sometimes and sometimes not) and what I found out is this...The flasher switch that is located in the dashboard above the radio is faulty. When my blinkers do not work i just tap down on the flasher switch without turning it on and my blinkers work again. Shotty electrical work in this car if ya ask me.
What is going on when the blinkers all of them quit working but the emergency flashers work for a 1992 Toyota pickup?
you need to replace blinker can in your vehicle. the flashers and blinkers have separate flasher cans which is why your flashers still work but not your blinkers
