0
no with floyd roses you apparently can but its a waste of money , the pickups and all the other electronics wont produce the proper sound. The alternative is silk and steel strings of course, not EXACTLY nylon but recorded the same guitar part with electric strings (GHS) to D'Addario silk and steel i heard a huge difference.
What else can I help you with?
Is it possible to convert classic guitar to acoustic guitar?
Not a good idea. The classical guitar is made for nylon strings that put less tension on the bridge than the steel strings used for standard acoustic guitars. It would most likely pull the bridge off the guitar.
Can you put nylon strings on a steel string guitar?
A: This can be very unsafe! The design of nylon string guitars is very similar from steel string guitars. To get the best sound from a guitar there is a balance between length and flexibility. Nylon strings are under less tension than steel strings so the top is made thinner and the internal braces are lighter allowing the instrument to vibrate more, giving you better volume. The extra pressure that steel strings put on a nylon guitar can, over time, cause the top to pull up, cause braces to come loose, and even pull the bridge off the guitar! Also, most nylon string guitars do not have internal neck reinforcement (truss rod) like steel string instruments do. This will cause the neck to pull forward causing the distance of the strings from the fret tops to decrease greatly making the instrument difficult to play. The tuning gear rollers on nylon instruments are also different. They are normally made from plastic which will not support the pressure of the steel strings. The shafts may break under the extra pressure. Good answer. But if you have a guitar that you don't care about, the sound is very tinny. Alright mate, enough of that, alright mate alright mate mate.
What are the best nylon strings for a acoustic guitar?
If you're used to nylon strings, you'll find at first that steel strings can hurt your left hand finger tips and if you're playing without a pick you might even tear off some skin of your thumb (you'll have to go at it pretty hard to actually hurt yourself like that, though).Additionally, steel strings are much thinner, and without callused skin on your left hand it might not be possible for you to press them down all the way at first.Once you're used to it, playing steel strings is no harder or easier than nylon.
Which classical guitar strings would you put on a baritone ukulele in order to a high d gbe tuning without fear of damaging the instrument?
You would use the same strings as on the guitar, but use only nylon strings, not wire. The wire would be higher tension and more likely to damage things.
Can you use light guitar strings on an electric acoustic?
You shouldn't do this. They have different types of strings for a reason. But if you're still insistent upon trying it, make sure you have a professional guitar tech do this for you, because chances are, even if you use the exact same gauged strings, you will have to have your truss rod readjusted, which will cost more than buying strings that are made for an electric guitar.
Can I put nylon strings on my steel string guitar?
No, it is not recommended to put nylon strings on a steel string guitar as the tension and construction of the guitar may not be suitable for nylon strings.
Can you put nylon strings on an acoustic guitar?
Yes, you can put nylon strings on an acoustic guitar, but it is important to make sure the guitar is designed for nylon strings as they exert less tension than steel strings. Using nylon strings on a guitar designed for steel strings can cause damage to the instrument.
Is it possible to put nylon strings on an acoustic guitar?
Yes, it is possible to put nylon strings on an acoustic guitar, but it is important to make sure the guitar is designed for nylon strings as they exert less tension than steel strings.
Can you put steel strings on a nylon guitar?
No, it is not recommended to put steel strings on a nylon guitar as it can damage the instrument due to the higher tension of steel strings.
Can you put steel strings on a nylon string guitar?
No, it is not recommended to put steel strings on a nylon string guitar as it can damage the instrument. Nylon string guitars are designed to handle the lower tension of nylon strings, while steel strings require a higher tension that can potentially warp the neck or damage the bridge of a nylon string guitar.
Can you put Fender guitar strings on a guitar that isn't Fender brand?
no any other brand of guitar will self-destruct because it can't handle the awesomeness of fender strings
Can I put steel strings on a nylon series Taylor guitar?
They will ruin the instrument.
Can you put metal strings on a classical guitar?
Yes, you can put metal strings on a classical guitar, but it is not recommended. Classical guitars are designed for nylon strings, which produce a different tone and put less tension on the guitar's neck. Using metal strings can damage the guitar and affect its sound quality.
Can I put steel strings on a classical guitar?
No, it is not recommended to put steel strings on a classical guitar as it can damage the instrument due to the higher tension of steel strings. Classical guitars are designed for nylon strings which have lower tension.
Can you put steel strings on a classical guitar?
No, it is not recommended to put steel strings on a classical guitar as it can damage the instrument due to the higher tension of steel strings compared to nylon strings typically used on classical guitars.
Can you put Gibson guitar strings on non-Gibson guitars?
Of course you can. You can also put Fender strings on a Gibson. Nothing bad will happen. Just make any necessary truss rod adjustments if you are putting different gauge strings on a guitar.
How do you put nylon strings on a guitar with pegs?
To put nylon strings on a guitar with pegs, first insert the end of the string into the hole on the peg. Wind the string around the peg in the direction that tightens the string. Tune the string to the desired pitch using a tuner. Repeat the process for each string.
