0
No, the mA rating of adapters is the maximum amount of load that can be drawn from the adapter. 1 amp is equal to 1000 mA. By replacing a 800 mA adapter instead of using a 1000 mA adapter is limiting the connected devices load by 200 mA. If the connected device draws 800 mA's or less then the adapter will work.
What else can I help you with?
What does polarity mean on a universal ac dc power adapter?
According to google if you have an automatic universal adapter, that adapter will automaticly find and adapt itself , the polarity ,voltage,amper , so that means an adapter can adapt polarities as well as voltage and current. A manual universal adapter on the other hand you have to adapt the polarity manually on the adapter itself , by checking what the device you wanna power has positive or negative, most electronic devices presently use positive . Check and see what voltage , amper and polarity a device needs. Positive : +--o)--Minus , Negative : Minus--o)--+ Or Positive: Minus--(o---+ , Negative : +---(o---Minus And adjust manually to what is required.
How do you fix a car lighter when the actual car lighter adapter works but when plugging in a GPS or Satellite radio plug it doesnt work?
If the car lighter adapter works but devices like a GPS or satellite radio do not, first check the device's plug for any debris or damage. Ensure the device is compatible with your car's power outlet specifications. If the device still doesn't work, try using a different car lighter outlet or test the device in another vehicle to rule out issues with the device itself. If necessary, inspect the vehicle's fuse related to the power outlet and replace it if it's blown.
Will a 6V adapter work on a 9V device?
Depending on what we're talking about here, most devices will tolerate +/-15%, or in your case, 7.65v to 10.35v. A 6V power supply will only give the device 66% of the power it's rated for (not enough). Even if you could find an adapter that would fall within the 15% tolerance, it's not a good idea to try it. A multi-voltage adapter can usually be purchased for cheap at your local RadioShack or if you're feeling lucky, you might be able to find one at any place that recycles electronics (Goodwill or any local recyclers).
How do you charge a trio v418?
To charge a Trio V418 tablet, connect the provided charging cable to the device's charging port and plug the other end into a power outlet using the appropriate adapter. Ensure the outlet is functional and the connection is secure. The charging indicator will typically show a light or icon to confirm that the device is charging. Allow the tablet to charge fully for optimal performance.
Where is the fuse located on a xm skydock?
The fuse for an XM Skydock is typically located inside the power adapter. If you're experiencing issues with power, check the adapter for a fuse that can be replaced. Additionally, ensure that the vehicle's power outlet is functioning properly, as this can also affect the Skydock's operation. Always refer to the user manual for specific instructions related to your model.
Will 9v 300mA power adapter work with a 9v 700mA device?
No, the adapter's power output has to be equal to or greater that the current draw of the device.
Can you use a 300mA adaptor on a 1A device?
Yes, you can use a 300mA adapter on a 1A device, but it may not work properly or could damage the adapter. The device may draw more current than the adapter can provide, leading to insufficient power, potential overheating, or failure of the adapter. It's always best to use an adapter that meets or exceeds the device's current requirements for optimal performance and safety.
Can a 9v 800ma adapter be used on a 9v 200ma device?
Yes. There's a subtle difference in the meaning of the "--- ma" labels on the two units:-- On the "device" ... the unit that uses power ... the "200ma" is the current it useswhile it's operating.-- On the "adapter" ... the unit that supplies power ... the "800ma" is the maximumcurrent that it's able to supply. Anything less than that is easy.So your adapter is OK to operate your device. In fact, with suitable wiring and a bit ofcooling, it could nominally operate 4 of them at the same time.
Can you power a 9v 700ma device with a 9v 300ma adaptor?
No. The device will try to draw 700 milliamps which will overload the 300 milliamp adapter most likely causing it to burn out and possibly catch fire.
What adapter has more power the 9v 600ma or the 9v 800ma?
The capacity of the 800 mA adapter is 200 mA larger than the 600 mA adapter.
What does 9 volt 800mA means?
A 9 volt 800mA rating indicates the power output of the device, with 9 volts being the voltage supplied and 800mA (milliampere) being the current capacity. This means the device can provide a continuous current of 800mA at a voltage of 9 volts.
Can you use a 12VCD 500mA instead of a7.5V 800mA AC power adapter?
Yes you can. But it may damage your computers power supply.
What type of power supply does a sportcraft unicorn 78057 dartboard use?
Sportcraft / Unicorn Part# 79534 "AC Adapter - 9V/800MA" 9 Volt, 800MA +/- AC adapter See attached image of official parts re-order form and manual.
What type of power adapter is compatible with this device?
The device is compatible with a USB-C power adapter.
Say the power consumption of my 12v devise is 80 mA or less and the instructions say use a 12v 300 mA power supply and I use a 12v 800mA OK or not?
Generally, yes. If your devise will only draw 80mA, it will do it whether it is connected to a supply that is capable of supplying 300mA or 800mA. The amperage rating on the power supply is the highest current that it is rated for. It will easily and safely provide less current. The load that is connected to the power supply will determine the actual amount of current.
Can you safely use a universal AC adaptor set for 9V 300mA for a game that requires a 9V 700mA?
No, a power adapter must supply the same voltage, same polarity, and at least as much current as the load requires. Your adapter can only supply 300mA, which is less than the 700mA required by the load.Your game probably will not turn on and the power adapter may be damaged.
Can you use a 300ma power supply in place of a 400ma supply?
Yes, you can use a 300mA power supply in place of a 400mA supply, but it may not provide enough current for the device to operate properly. If the device requires 400mA and only receives 300mA, it may underperform, malfunction, or even be damaged due to insufficient power. It's important to ensure that the power supply meets or exceeds the current requirements of the device for safe and effective operation.
