either there will be a trussrod cover on the headstock that once you remove it there will be a spot to put an allen key or 5/16 socket wrench in.
maybe around the last fret , say 22 or 24.
or WORST case scenario take the neck pickup out and look , it's one or the other
some Guitars may not have trussrods which is very uncommon on todays standards so hopefully that isn't your case.
good luck
you can't because the neck of the bass guitar is to long for an electric guitar case.
The Fender Telecaster Deluxe is an electric guitar with a bolt-on neck joint and a solid body. This guitar is made of alder or ash and maple. The manufacturer is Fender.
The "body" of the guitar is the part of a guitar that contains the soundhole (in an acoustic guitar) or, more generally-speaking, the larger part of the guitar where the bottom of the neck/fret board and strings are attached...in both acoustic and electric guitars.
if the neck fits in the joint absolutely , but make sure to intonate the guitar so the harmonics line up with the neck which is something big for experienced players, very easy to do. Tune the guitar perfectly than do harmonics on the 12th fret and adjust the bridge until they're dead on. It sounds hard but it isn't. also make sure the neck us sitting on the guitar right because this could create problems on the neck with playabillity. I modified the neck on my main guitar and it didn't sit right on the neck at first and i had some dead notes which went away when the neck was perfectly straight. but hope I could help.
anywhere on the strings below the nut and below where your hands are on the neck
You can purchase used electric guitar necks from ebay. You would have to search 'used electric guitar neck' and most likely the make of the guitar neck you are looking for.
you can't because the neck of the bass guitar is to long for an electric guitar case.
THE BENEFITS ARE IT STRENGTH AND SUSTAIN
Short answer: Anything that SECURELY holds the guitar, and puts no forward pressure on the neck anywhere above the heel. Conventional guitar stand are OK, but adjust the neck yoke as low as possible on the neck. And the very best guitar holder - note it - is a closed hard shell case.
A short scale electric guitar means the neck of guitar is shorter than a standard guitar. There many reliable guitar makers a popular one is the Telecaster guitar.
YES IT DOES but if your guitar starts off with metal strings keep to metal strings.if you start to use nilon your guitar neck will eventuly weaken. if your guitar starts off with nilon strings NEVER EVER put metal strings on on it. your guitar neck will not be able to widstand the presure and your neck will sink there for stuffing your guitar.
You can use any electric guitar just like an acoustic, but the main differences are the action (string distance from the neck) and possibly the width of the neck. Electric guitars may have narrower necks and the action height is usually closer to the neck. Action can be adjusted in electric guitars. As far as I know, all electric guitars have steel strings with varying thicknesses for flexibility. Some acoustic guitars have nylon for the same purpose.
raise the action (string elevation) lower the pickups springs or.. adjust the neck
Yes you can. So long as the capo will physically fit on the neck.
The Fender Telecaster Deluxe is an electric guitar with a bolt-on neck joint and a solid body. This guitar is made of alder or ash and maple. The manufacturer is Fender.
The "body" of the guitar is the part of a guitar that contains the soundhole (in an acoustic guitar) or, more generally-speaking, the larger part of the guitar where the bottom of the neck/fret board and strings are attached...in both acoustic and electric guitars.
if the neck fits in the joint absolutely , but make sure to intonate the guitar so the harmonics line up with the neck which is something big for experienced players, very easy to do. Tune the guitar perfectly than do harmonics on the 12th fret and adjust the bridge until they're dead on. It sounds hard but it isn't. also make sure the neck us sitting on the guitar right because this could create problems on the neck with playabillity. I modified the neck on my main guitar and it didn't sit right on the neck at first and i had some dead notes which went away when the neck was perfectly straight. but hope I could help.