I imagine a 2002 would have similar wiring to a 2000 Explorer which I've just discovered myself has 2 fuses dedicated to the factory installed trailer wiring. Fuse #3 is for the left trailer signals and fuse #7 is for the right. Hope this helps someone to avoid all the hassle I went through to figure this out.
http://fawgame.com/?rf=41726368616e67656c this is maybe
get on internet: www.installdr.com for wiring diagram
Many auto parts retailers will have a plug-in trailer connection that is designed specifically for your vehicle. If they do, it's usually just a quick process of following the directions. It's worth it especially since it can help you keep from having the connections corrode.
Make certain that the wiring is connected properly but also, check the ground wire. Don't count on the hitch to be the ground for the trailer. There should be a ground wire that goes to the electrical plug, make certain that it is connected properly.
where do you find the replacement bulb for a 2001 Chevy Malibu ls for fog light replace ment on the car
You can find a trailer wiring harness for a Chevrolet in a Haynes repair manual. The manuals are available at most auto parts stores.
how do I install a trailer lights to a Honda 1998
How do you install trailer wiring on a 2009 civic
Your local auto parts store can sell you a trailer light kit that plugs into your existing rear light harness, no cutting, no splicing. Takes about 5 minutes to install and costs under $30.
It doesn't have one in the stock radio
Remove the belt from your 1999 Chevrolet Malibu alternator. Remove the wiring harness from the back of the alternator. Remove the alternator retaining nuts. Reverse the process to change to the new alternator.
The wiring should already be hooked up, just go into the fuse box under the hood, remove the red plastic block in the front inner corner space and install a Jcase 40 fuse in it's place.
To rewire a trailer, first disconnect the old wiring and remove it. Then, install new wiring following the color-coded diagram for proper connections. Secure the wiring in place and test the lights and brakes to ensure they are functioning correctly.
you do not need the extra 7 pin if your not running electri brakes
U-Haul sells a kit with instructions
Not all trucks are built with a trailer harness plug. If you can not find one, then your truck does not have one and you need to install one.