* thorough knowledge and understanding of Music Theory. * able to sight read at will - this is usually a standard requirement during an interview and audition ... the interviewer will place a completely unfamiliar hymn in front of you and you are expected to play it as if you had been playing it for 20 years.
* ability to coordinate hands and feet playing simultaneously. * be able to hold a constant tempo for hymns - congregations will slow you down to a crawl, and knowing how to combat that is essential.
* be willing to take much criticism: you play too loud, you play too soft, you play too fast, you play too slow, the hymn keys are too high, the hymn keys are too low, etc. * be an excellent accompanist - takes years of training to accomplish this. * know how to modulate ... some hymns must be transposed (at sight) to accommodate a particular soloist, sometimes with absolutely no advance notice.
Be willing and able to take organ lessons. There are some schools of thought that say that at least six years of piano lessons were to be completed before continuing on to organ lessons. One should study classical organ with a tutor/teacher for at least one year before taking on a church position on this instrument. Some professional organists make it look easy, but they've been playing for 30+ years, too. It's a rewarding career though ... I personally have been in this profession for nearly 50 years and still enjoy it as much now as I did when I started many years ago.
The resale value of a 1921 Moller Pipe Organ that is intact and operative can vary significantly based on its condition, historical significance, and market demand. Generally, prices can range from $10,000 to over $100,000. Factors such as the organ's size, the number of pipes, and any unique features will also influence its value. For a precise appraisal, consulting with a specialist in vintage musical instruments or antique organs is recommended.
The number of reeds in an organ can vary significantly depending on the type and size of the organ. Smaller organs may have only a few dozen reeds, while larger pipe organs can have hundreds or even thousands of reeds. Each reed corresponds to a specific pitch, and the total number depends on the organ's design and intended musical repertoire. Ultimately, there isn't a fixed number; it ranges widely across different organs.
One may purchase a small, used pipe organ for under $10,000 (American). However, new pipe organs cost at least $10,000 per rank average. A typical, medium sized church organ will have between 12 and 20 ranks.
An adult size viola is between 15-17" in body length. There is no normal.
The differing lengths of pipes are what allow the organ to produce different pitches. Pitch (frequency) is directly related to pipe length. The longer the pipe the lower the pitch. This gives rise to the standard organ terminology that tells the performer at what pitch level a stop (or set of pipes) will sound. This is determined by the theoretical length of the lowest pipe in a particular stop. An 8-foot stop produces notes of unison pitch (on the manual keyboards - 16' for the pedal keyboard). A 4-foot stop produces pitches an octave higher than unison. A 2-foot stop is 2 octaves above unison. A 16-foot stop is one octave below unison, etc.
Both test tubes and a pipe organ involve the concept of containing and manipulating air. Test tubes are used in laboratories to hold substances for experiments or reactions, while a pipe organ uses air to produce sound. Additionally, both items can vary in size and are typically made from glass or metal.
It depends on the size - length x width x height.
DN is an acronym for Diameter Normal that refer to metric designations of pipes that conform to the International Standards Organisation (ISO). DN100 refers to a pipe with a Diameter Normal of 100 mm and a Nominal Pipe Size (NPS) of 4 inches.Answer:Actually the N means nominal. Because the actual size of the pipe is nowhere what the nominal size is.
The average size for an adult is 5-6 inches.
normal pipe size(nps) greater than or equal to 36" double seam is used.
Pipe size refers to the diameter of the pipe (in inch).
If I remember correctly, the pipe size is the inside diameter, so it would depend on the thickness of the wall, as to what size it would fit into.
Pitch is directly proportional to the size of the pipe.
it is, probably, a pipe with nominal diameter (DN) 6 mm, and wall thickness 1.727 mm (SCHEDULE 40). See it here: http://en.wikipedia.org/wiki/Nominal_Pipe_Size
it depends on the size of the pipe,but usually two or more.
Pipe bore is the actual minimum inside diameter of a pipe, which is not necessarily the nominal pipe size.
involution: a retrograde change of the entire body or in a particular organ, as the retrograde changes in the female genital organs that result in normal size after delivery.