2 screws underneath radio and 2 more after you pop off the gear shift cover. Unscrew the gear shift knob and pull off the plastic cover, then unscrew the last 2 screws. Then unsnap the remaining face plate for the stereo that includes the hazard light button and the air conditioning vents. Then there are only four more screws to unscrew the radio.
the dashboard compartment pulls out of the dashboard there is no bolts holding this in. Then there are two bolts that hold the radio at the top. the rest is probably self explanitory as the other parts and bolts come out the same way.
* Remove the ashtray and ashtray holder * Remove the radio and mounting plate screws and lower the radio and unplug the electrical connector and antenna lead then push the radio out of the dashboard
If you turn up your interior dashboard light settings, then the radio display will be brighter too. The radio dims to the setting for the dashboard when the lights are turned on.
I just changed mine, you have to take the screws out of the pieces below the radio so you can get to some more screws which are located on a bracket beneath the radio! The radio will slide out with the bracket attached! Not a 5 minute job!
Remove the 1993 Toyota decorative radio cover in. Remove the radio retaining screws. Pull the radio out. Remove the wiring harness.
the dashboard compartment pulls out of the dashboard there is no bolts holding this in. Then there are two bolts that hold the radio at the top. the rest is probably self explanitory as the other parts and bolts come out the same way.
To remove the radio in a 1995 Toyota Corolla, first pry the radio frame from the dashboard using a flat tool like a screwdriver. Then, press in on the pins at each side of the radio and slide it out of the dashboard. Remove the wires from the back of the radio.
To remove the radio from the 1990 Lexus ES250, first pry the face plate from the dashboard. Then remove the clips that hold each side of the radio. Then, remove the wires to release the radio.
Remove the radio and the fuse is behind the radio
To replace the radio on a Ford E350, first remove the bezel from around the existing radio. Then, release the clips on either side of the radio and remove it from the dashboard. Then, release the wiring. Place the new wiring on the replacement radio and insert it into the dashboard. Lock the clips in place and replace the bezel.
To remove and replace the heater core on the 1987 Nissan 300ZX with air, begin by removing the dashboard totally. This means the radio panel and the instrument cluster. Remove all air ducts and access the heater core. Remove the bolts holding the core and replace it with a new core. Then replace the dashboard and instrument panel.
Remove the dashboard faceplate, and the rest is pretty simple.
how do I remove the dashboard from a Mercedes c 280 1995?
You do not have to take the dash out. There are screws that you can access in order to take the radio out.
* Remove the ashtray and ashtray holder * Remove the mounting screws lower the radio unplug the electrical connector and antenna lead then pull the radio out of dashboard
* Remove the ashtray and ashtray holder * Remove the mounting screws lower the radio unplug the electrical connector and antenna lead then pull the radio out of dashboard
In order to remove the radio unit, you need to unbolt the radio. The bolts are concealed by the dashboard's trim panels.