answersLogoWhite

0

You must insert the 5 digit code. If you cannot find the code, then go to the selling dealer. They may have it on file. If not, you will have to remove the radio the get the serial # off the radio chassis. With that serial # the dealer can provide the code. There is no other way.

User Avatar

Wiki User

17y ago

What else can I help you with?

Continue Learning about Music & Radio

Does a stock Chevy uplander radio have an aux speaker jack input?

Not on my 2006 Uplander.


How do you remove a Toyota Sequoia radio?

Easy job on the 2002. Turn the two center air vents down and look inside above them. You will see a screw in each. Remove the screws and the face plate will come off. The radio is then bolted into the dash and can easily be removes. I hope no car radio theives are reading this!


How do you remove a radio from a 2006 Chevy Malibu?

1. Pull both side console panels off the center console. (These are by your feet in the front). 2. Remove the screw on either side that has the shifter panel attached. 3. Pull the shifter panel up at the rear and down at the front to pop it off and pull it back a little. It won't remove completely due to the shifter. 4. Remove the two screws that you just exposed below the traction control/hazard/airbag panel and disconnect the wires attached to the panel. 5. Carefully pull the trim up from around the HVAC controls and the radio. You also have to remove the center wood piece. 6. Now you can remove the screws holding the HVAC and the radio in place and pull the radio out.


How do you remove the radio on a 2003 to 2006 Dodge Sprinter?

There are two special tools that look like keys that are inserted to release locking tabs.


On a 2003 Toyota matrix radio what is the aux input for and how do i use it?

Its for installing an auxiliary audio device, like a CD changer or a satellite radio. You have to remove your radio to attach a device to it. There was no auxiliary input in the 2003 Toyota matrix and was not optional the first aux was for the 2006 matrix and up