How do you replace the Window motor in the front driver door of a 2000 Jeep Grand Cherokee?

Answer 1

pls see...

http://www.faqfarm.com/Q/What is wrong when the front passenger power window motor sounds like it%27s going to work but then stops and the window will not move on a 1999 Jeep Grand Cherokee

Answer 2

2000 body style you have to remove the door panel, there are some hidden screws.. there are two holes at the bottom of the door panel actually in the carpet. just feel the length of the door panel and you will find them. there are two that hold the window switch on and one behind the switch itself. there is one behind the handle and one more in the armrest then just pull really really hard on the panel. My professional advise is do not do this your self if if are not familar with this kind of work. you will go bonkers.

Answer 3

it is pretty easy actually, just remove the door panel and there is a few bolts that hold the thing in place, and some clips that hold the window onto the motor, just keep track of how you take the broken one out and put the new one in the same way, it might take an hour or 2 but it isn't hard to figure out.

Also make sure you lube all the tracks and brackets, for optimum performance.)

Answer 4

My husband and I own a body shop. People always think they can fix a window regulator but it is not as easy as you think. I have been working in our shop for aprox. 25 years and I still hate working on doors. My suggestion, get a professional. They have tools that make taking the panel off, regulator out and also tools to put the regulator in, a whole lot easier. Sorry.

Answer 5

You need to make sure it is bad because they don't give these things away. You have to pull the door trim pad.