its easier to but a new head unit, honestly...i did it myself
if the clock is not displaying that is light bulb you can buy on eBay or at a gm dealer.
Is the radio playing? If so, it could be the bulb is burned out, or the grounding needs to be checked out. Replace all the fuses even if they seem not blown it worked for me!
Answerpleas go to www.corvetteradios.com and look up what type of GM radio you have, and they will tell you what bulb you need and how to replace it. Second opinion: I have a 2000 P M with same problem & the Chevy dealer told me it could not be replaced. He said they replace the radio.Ye! Sux I know!
its up your ass
There is no replaceable bulb in the illuminated switches on a steering wheel. There is no room inside the button for a bulb, and such a bulb would create so much heat, that it would melt the assembly The illumination LED is integrated into the switch circuitry. The only way to fix it is to relace the switch assembly.
How do you replace headlight bulb on 2004 Mazda Tribute?
how do you replace the radio light bulb
To replace the third brake light bulb on a 2004 Toyota Matrix, first, open the rear hatch and remove the plastic cover that shields the brake light assembly by gently prying it off with a flathead screwdriver. Once exposed, twist the bulb socket counterclockwise to remove it from the assembly. Pull out the old bulb and insert a new one, then reassemble by reversing the steps. Finally, test the new bulb to ensure it’s functioning properly.
how to replace the light bulb on the gear shift on 2004 tracker
how do you replace a honda crv licence plate bulb on a 2004
i need to replace the temperature control light bulb on my 2004 silverado.
how to replace the license plate bulb on a 2004 Honda cr-v
To change the headlights on a 2004 Toyota Matrix, first, open the hood and locate the headlight assembly. For the high beam, remove the rubber cover, twist the bulb socket counterclockwise to release it, and then pull out the old bulb. Insert the new bulb without touching the glass, reattach the socket by twisting it clockwise, and replace the rubber cover. For the low beam, follow the same steps, ensuring you access the correct bulb.
some buttons are out in the radio panel of my gmc Yukon 2003
To replace the radio light bulb in a 2005 Pontiac Vibe, first, you'll need to remove the radio from the dashboard. This typically involves using a flathead screwdriver to carefully pry off the trim panel surrounding the radio. Once the radio is out, disconnect the wiring harness and locate the light bulb socket at the back of the radio. Replace the old bulb with a new one of the same type, reassemble everything, and test the radio to ensure the light is functioning.
you don't sorry :(
how do you replace a turn signal bulb on a 2004 jeep liberty. I can not find screws or a panel to go through