Follow the top radiator hose back to the engine. There is where the t-stat housing is. Remove the hose, remove the housing, remove the old t-stat, clean gasket surfaces install the t-stat into the housing with the spring side sticking out toward the engine, use spray adhesive to attach the gasket(DO NOT USE RTV), reinstall everything and be careful to evenly tighten the housing bolts until they are snug(DO NOT RAUNCH HARD ON THE BOLTS). Fill the cooling system with a 50/50 mix of coolant and water, and burp the system.
how doyou install a thermostat in a 1994 jeep
Its in the dash with te other harnesses...(orange.....i think)
I had a 95 Ford Explorer and all you have to do is to hold the clock button and then click press the bass and treble button.
The thermostat is located at the termination of the upper radiator hose directly behind the fan.
180 degrees to 190 degrees depending on what thermostat you use
In a 1997 Mercury Mountaineer : r134a
In a 1997 Mercury Mountaineer : ( 4R70W )
Mercury Mountaineer was created in 1997.
Where is the location of the EGR valve on a 1997 Mercury Mountaineer V*
No , a 1997 Mercury Mountaineer is not designed to have a third row seat ( the 2002 and newer Mercury Mountaineer were designed to have a third row seat )
The first model year of the Mercury Mountaineer was 1997
The first model year for the Mercury Mountaineer SUV was ( 1997 )
The first model year of the Mercury Mountaineer was 1997
If you have a 1997 to 1998 Mercury Mountaineer or Ford Explorer with a V8 engine, you will have a 4R70W transmission.
Since the first model year of the Mercury Mountaineer is the 1997 model it would be ( r134a )
No , the fuse box is totally different in the 1997 and 2005 Mercury Mountaineer
On a 1997 Mercury Mountaineer : The " CHECK ENGINE " warning light is just to the left of the battery voltage gauge