0
How do you attach a microphone to an amplifier? Go with your microphone output to the input of the pre-amplifier. Look for the correct connections and care for the right voltage. Often you need e.g. symmetric 48 volts phantom powering or 5 volts or so for the electret microphone amplifier.
Wiki User
∙ 15y ago
Wiki User
∙ 13y agoIf your amp is not equipped with a microphone style input jack, you get an adapter from a music store that will change the mic jack from a 3-prong jack to a 1/4" jack, so you can plug this into your amp.
Wiki User
∙ 13y agoYou can use the carry strap to hang a mike by its' cable in the way of the edge of the speaker. About 1/3rd of the way to its center. A desk mike holder pointing the mike at the speakers edge works also. Depends on the type of mike also. You have to hear it to see if it's right. Talk to a working soundman. Frank Zappa definitely has an opinion on the subject.
Add your answer:
Earn +20 pts
What do you plug a microphone into?
Through the MIDI (Musical Instruments Digital Interface) port.
Does a microphone work with out a amp?
No, really not.
Can you plug the shure pg48 microphone into a guitar amp?
yes you can but you have to have some sort of pick up so the sound will travel from the strings to the speaker but i wouldn't advise this because it will not be very loud you will have to have something to ampify the sound so just brake down and buy a good used or even better brand new Line 6 Spider Series.
Can you change 32 amp 110v plug to a 16 amp 110 v plug?
Provided the equipment draws less than 16 amps it can be supplied from a 16 A plug.
Guitar loose amp plug?
This can happen and may require opening up the guitar to retighten the loose amp plug fitting from inside.
Can you plug a microphone into a guitar amp?
Yes, you definitely can.
How do you get to be a singer?
get a freaking microphone. get a karaoke or amp machine and plug the microphone in. Sing. That's all for today. (:)(:(
What do you plug a microphone into?
Through the MIDI (Musical Instruments Digital Interface) port.
Does a microphone work with out a amp?
No, really not.
What cables do you need to connect a microphone pre-amp to your computer?
A microphone preamp's output may be XLR or 1/4". You will need a cable that will adapt that output to a 1/8" stereo plug for the line input of your computer.
Why your microphone is not working even after buying a new one?
You didn't plug the cord in all the way. It may not be the actual microphone. On occasions the socket of the amplifier can short out (connection break). It would be wise to test your mics on another persons amp to see it they work there - this will give you a guide back to a faulty amp.
Do you need any kind of special Microphone to plug it into a guitar amp?
No, you just need the right end on your mic cord. You can either purchase one with a 1/4 plug on one end of the chord or get an adapter for your mic chord that changes the 3 pin plug to a 1/4" plug. Remember not to aim the microphone at the speaker as this will create feedback, other than that, have fun!
How do you make a mike work on a computer?
If the microphone has a USB plug, then plug it into the USB port on the computer. If the microphone has an audio plug, then plug it into the audio input port on the computer. If the microphone came with any software disks, then install those after plugging the microphone into the correct port on the computer.
Were do you plug your subs into?
well you plug your sub into your amp you do have an amp write
What amp plug should a vacuum have?
Generally, a 15 amp plug.
Can you plug the shure pg48 microphone into a guitar amp?
yes you can but you have to have some sort of pick up so the sound will travel from the strings to the speaker but i wouldn't advise this because it will not be very loud you will have to have something to ampify the sound so just brake down and buy a good used or even better brand new Line 6 Spider Series.
What is a microphone Jack?
I think the answer you are looking for is MICROPHONE JACK PLUG, meaning the plug/connection that fits into an amplifier or any output socket from the microphone itself. Hope this helps
