Try disconnecting the negative battery wire, leave it off for ~5 minutes, then reconnect. Start the engine. The radio should read "CODE". Using the station preset buttons (1 through 6) enter your code. Then turn the radio on. Works for my '93 Prelude; hope this helps you!
Press and hold the Sound button in until you hear a beep. Then press the 4 button to adjust the hour, and the 5 button the adjust the minutes. Press the sound button again to start the clock.
To enter the radio code for a 2003 Honda Pilot, first, turn on the ignition and the radio. If the radio displays "CODE," use the preset buttons (1-6) to input your code. Press the corresponding button for each digit of your code; for example, if your code is 1234, press button 1 once, button 2 twice, button 3 three times, and button 4 four times. Once the code is entered correctly, the radio should unlock and resume normal operation.
find the station that you like, press and hold the preset button for 2 seconds.
The radio code is input through the preset radio station buttons on the face of Honda factory radio's. If you dont know the code to your radio contact Honda and give them your radio's S/I and other info about your car (ie: make, model, year) and they should be able to read you your radio code.
All you have to do is find the voice control button and press volume and say the number you want and it will turn it to that level for you.
You can post the answer by clicking the orange 'Save' button.
Press and hold the Sound button in until you hear a beep. Then press the 4 button to adjust the hour, and the 5 button the adjust the minutes. Press the sound button again to start the clock.
Press the unlock button on the key.
Press the FM button marked clock in small letters. Time will flash. Press the #4 preset button to set hour; press #5 for minute. Press the FM button again to complete.
Press the FM button marked clock in small letters. Time will flash. Press the #4 preset button to set hour; press #5 for minute. Press the FM button again to complete.
To make a graph on a calculator, the first button you typically press is the "Y=" or "Graph" button, depending on the model. This allows you to input the equations or functions you want to graph. After entering the equations, you can then press the "Graph" button to display the graph on the screen.
Turn the key on. Put it in neutral and press in the start button.
From the user manual: Faxing Entering the Date and Time 1 - Press the FAX button, then press the Menu button. 2 - Press the [ or ] button to select USER SETTINGS , then press the OK button two times. 3 - Press the Numeric buttons to enter the date and time (in 24-hour format), thenpress the OK button. Enter only the last two digits of the year. 4 - Press the Stop/Reset button.
To set the clock on a 2006 Honda Jazz, first turn on the ignition or accessory mode. Press and hold the "Clock" button until the hours start flashing. Use the "H" button to adjust the hour and the "M" button for the minutes. Once set, press the "Clock" button again to confirm and exit the adjustment mode.
To enter the radio code in your Honda CR-V, first, turn on the ignition and then the radio. The display will show "Enter Code" or "Code." Use the radio preset buttons (1-6) to input the code; for example, if your code is 1234, press button 1 once, button 2 twice, button 3 three times, and button 4 four times. After entering the code, the radio should unlock and begin functioning normally.
press the cruise button on your steering wheel
all you have to do is press ~