Sounds like your dimmer switch isn't working or it is turned all the way down for night driving.. It has a setting that allows you to turn off the lights on your dash and radio for driving at night. Locate your dimmer switch and see if it is turned down all the way. If not it may have gone bad and needs to be replaced.
Sounds like the lights maybe shorted out. You'll have to trace the wires back to check for damage. Could be a long slow process, good luck.
Well you mean tail lights i think and it has to either they are burnt out or a brake edal sensor is the problem and is stuck
No problem, bring it in first thing in the morning and i will get right on it......
I would check the wires just behind the light. I had the same problem and the wires were broken a little just wiggle them as the lights are on.
My Brake tail Lights Stay on when my car is complete turned off and my lights are off to.
how do you fix your lighting problem with your 94 chevy cavalier z24 you haveno tail lights dash lights or parking lights
If the 2000 Cavalier has no lights an will not start, there is an electrical issue. Check the battery, alternator, and the wiring from the battery all the way to the starter to find the problem.
check your fuses
what are the warning lights in the Chevy cavalier z24. and what do they mean
Bring to a shop that has an ABS scanner to determine the problem Bring to a shop that has an ABS scanner to determine the problem
YES
Bad socket? Bad ground? Problem in steering column switch?
i was wondering whether the switch at the parking brake could affect this problem.
The problem points to the directional/lights and hazard switch. The brake light wiring is part of that circuit.You can buy the switch after market it is about $70.00.
cavalier break lights not workin no indicators neither help fuseis gud do i need to change panals were bulbs go or what????????????
The 2002 Cavalier has a reverse light switch. The switch can be bad, or have a loose connection causing the lights not to work.
If neither signal light works, the flasher may very likely be the problem. The hazard lights and the signal lights work off different flashers.