Answering "http://wiki.answers.com/Q/The_wiring_harness_plug_was_cut_off_your_97_E350_ford_radio_and_you_want_to_install_a_radio_but_you_dont_know_which_is_the_color_for_radio"
take the old one out noting if it has a wiring harness from the auto wiring to mate to the radio harness ie male/female connectors, if so cut the harness from the old radio and splice to the new radio soldering or electrical tape connections following the color coded diagram that comes with the new radio. If the harness is not already there buy a new one for make/model of auto and install. Plug in harnesses to each other and install new radio after connecting the antennae.
No. You buy a waring harness and connect it to the car wiring and the amp to the speakers there behind the radio.
yes. The wiring structure has only minor differences between 1996-2003 eldorados.
Yes
It is possible that you connected the power wire for the harness to the computer power. It was like that in my truck when someone did an at home addition of a wiring harness for the new head and changer. Check your wiring.
A 1997 Chevrolet Silverado radio wiring harness color codes chart can be obtained from most Chevrolet dealerships. The wiring harness color code chart can also be obtained from most auto-parts stores.
well is it a radio wire harness because if so yes
Connect the wiring harness on the back of your new radio. Slide the radio into the radio slot. Tighten down the radio retaining screws.
Connect the wiring harness and the antenna cable to the back of the new radio. Slide the radio into the radio slot. Secure the radio with the retaining screws.
You can find a radio wiring harness for your 1997 Ford at most auto-parts stores. Many electronic stores will also have the radio wiring harness.
take the old one out noting if it has a wiring harness from the auto wiring to mate to the radio harness ie male/female connectors, if so cut the harness from the old radio and splice to the new radio soldering or electrical tape connections following the color coded diagram that comes with the new radio. If the harness is not already there buy a new one for make/model of auto and install. Plug in harnesses to each other and install new radio after connecting the antennae.
* Purchase a compatible radio (aka head-unit)* Purchase the Windstar compatible wiring harness kit ($10 or less)* Remove and unplug current radio* install wiring harness per included instructions* connect wiring connections and antenna lead* insert radio until it clicks.See "Related Questions" below for lots more detailed information
you need the proper wiring harness to change the stereo in a cobalt or the security features will kick in once you have the proper harness you just have to match wires
Remove the radio retaining cover. Remove the radio retaining bolts. Remove the wiring harness and the antenna cable from the back of the radio. Reverse the process to install the new radio.
that suburban to nice a truck to splicing wires pimpn get the wiring harness . play it safe nate dawgg do not want you to go up in smoke.
The wiring harness for the radio in a 1991 GMC Pickup is going to be behind the radio. The wiring harness is plugged into the back of the radio. The fuse for the radio is in the fuse box located on the driver's side below the dashboard.
To install a radio you need a wiring harness for a 1994 Dodge (a Metra 80-1817 from Circuit City is what I used), and an installation kit (make sure it fits a 1994 Dodge Spirit). You'll probably need to splice the wires from the wiring harness to the stereo harness unless you can get find the right kind of connection somewhere.