0
Check the fuse, bulbs/assy., and wiring another thing to check is where the bulbs connect. sometimes like my 94 one of the connectors in the bulb housing was broken. also there is a brake light sensor on the brake petal that is turned on when you depress the brake. usually near the top of the brake petal
What else can I help you with?
How do you hook up trailer brake lights from 91 jeep Cherokee?
Many auto parts retailers will have a plug-in trailer connection that is designed specifically for your vehicle. If they do, it's usually just a quick process of following the directions. It's worth it especially since it can help you keep from having the connections corrode.
Where is the brake relay and how do you fix cylinder 5 misfire 1997 Jeep Grand Cherokee help please.?
Run a compression test, especially on the cylinder that is misfiring. If the compression is up, it's either the ignition or if the vehicle is manifold injected it could be the #5 injector. If you suspect ignition, try the plug, distributor cap or the wires. Can I run a compression check myself? If so how? If not would it be in my best interest to just replace the plug wires cap and rotor first? About the brake question, I meant brake switch not relay, brake lights are not working, not bulbs not fuse what else could it be? Look at the switch at the bottom of your brake pedal. It might have come loose or has shorted out.
1997 grand prix radio lights not working is this a bad fuse or do I have to replace radio?
if the clock is not displaying that is light bulb you can buy on eBay or at a gm dealer.
What makes your interior lights flicker on 1997 jeep grand Cherokee?
I would say 1 of your door switches are bad or your door doesn close all the way.
Have 1997 grand Cherokee replaced the bulbs in the tail lites and everything works fine as soon as I put my foot on the brake the rear lites on the vic flash saying there is an issue?
Couple of things. Check the ground for the loom at the rear. If that is clean and tight I would suspect that the problem is in the brake light switch.
How do you put brake fluid in a 1997 Ford Explorer?
To put brake fluid in a 1997 Ford Explorer, you must locate the brake fluid reservoir. Once you locate it, unscrew the cap, and replenish the brake fluid.
Where is the fuse for the brake lights on a 1997 BMW 740il?
Brake light fuse
Where is the fuse located for brake lights on 97 gmc savana explorer?
On a 1997 GMC Savana, the fuse for the brake lights is typically located in the fuse box under the dashboard on the driver's side. Specifically, you should look for the fuse labeled "Stop" or "Brake." If the fuse is blown, replacing it should restore functionality to the brake lights. Always consult the owner's manual for the exact fuse location and specifications.
How do you turn fog lights on in 1997 Ford Explorer?
On a 1997 Ford Explorer : The push button switch to turn on and off the fog lights is in ( the center stack of the dash , to the right of the radio )
Where is the brake light sensorswitch for a 1997 Chevy Pickup located?
are brake lights staying on or is brake in the dash on ?
1997 Mitsubishi eclipse brake lights stuck on?
check your clutch and brake fluid
Why would brake lights on 1997 Chevy Camero not work when lights are on?
The bulbs are burnt out.
Both the brake as well as headlights turn on when you turn on the lights on your 1997 Jetta GLS Brake lights stay on while driving What should you be doing?
are you sure it is the brake lights and not the tail lights. if it is the brake lights you most likely have a short some where. go to a auto eletrican It is the brake lights which turn on. Short in the switch or the wiring?
1997 Nissan sentra brake lights are not working?
the brake light driver side not working
1997 Cadillac eldorado has no brake lights the brake light in the rear window works and all signal lights work just no rear brake lights?
the turn signal switch is probably bad
Why won't the brake lights turn off in a 1997 ford escort?
The brake lights won't turn off because the brake light switch on the pedestal of the brake pedal needs to be replaced.
Why would brake lights on a 1997 Chevy Camero not work when lights are on?
check the brake light switch that is on top of your brake pedal under the dash, could be out of adjustment or bad.
