If there is one available for this car model, buy a connection harness. ( Autozone has them, maybe checker auto would have them also. I don't know if pepboys have it.) They are a great help. They plug onto the cars connection plug and the wires are marked on the harness. HINT: On factory speakers, the positive wire is almost always the wire closest to the clip on the wire connectors.
you should replace the factory amplifier and that will solve your problem
you are exeeding the factory amp and speaker ratings... its so you dont fry the sterio or blow the speakers
Constant 12V+ Wire: Light Green Ignition Switched 12V+ Wire: Black/Yellow Ground Wire: Black Illumination Wire: Blue/Yellow Dimmer Wire: N/A Left Front Speaker Wire (+): Green Left Front Speaker Wire (-): Blue/Red Right Front Speaker Wire (+): Light Green/Yellow Right Front Speaker Wire (-): Black/Green Left Rear Speaker Wire (+): Green/Yellow Left Rear Speaker Wire (-): Blue/Orange Right Rear Speaker Wire (+): Green/White Right Rear Speaker Wire (-): Green/Blue
2003 Chevrolet Silverado Car Stereo Radio Wiring DiagramRadio Constant 12V+ Wire: OrangeRadio Ignition Switched 12V+ Wire: Class 2 Serial DataRadio Ground Wire: Black/WhiteRadio Illumination Dimmer Wire: N/ARadio Antenna Trigger Wire: N/ARadio Amplifier Trigger Wire: PinkFront Speakers Size: N/AFront Speakers Location: N/ALeft Front Speaker Wire (+): TanLeft Front Speaker Wire (-): GrayRight Front Speaker Wire (+): Light GreenRight Front Speaker Wire (-): Dark GreenRear Speakers Size: N/ARear Speakers Location: N/ALeft Rear Speaker Wire (+): BrownLeft Rear Speaker Wire (-): YellowRight Rear Speaker Wire (+): Dark BlueRight Rear Speaker Wire (-): Light Blue
if you are using an aftermarket wiring harness hook up the remote turn on wire on the new radio it should be blue with a white stripe to the harness also has a blue and white stripe and plug it in this wire turns on the factory amplifier if you are not using a harness you will have to locate the internal amplifier wire of the radio and connect that to the remote turn on on the aftermarket radio = answer = the inernal apm power wire is white on the black wire harness ANSWER if you dont want to use the factory amp. just run new speaker wires to each speaker.
The left speaker wire (+) is dark green, and the left speaker wire (-) is brown/red in the door of a 1997 Dodge Ram. For the right speaker, the right speaker wire (+) is purple, and the right speaker wire (-) is dark blue/red.
6x9 is the speaker size.
The positive speaker wire is a solid color, your negative wire should have a stripe on it.
yes and no
The positive speaker wire is red while the negative speaker wire is black on a 2008 pathfinder.
All sides are 6" by 8".
Left positive to positive on speaker Right negative to negative on speaker
Yes, you can use your factory speakers.1988 Nissan Pulsar Car Stereo Wiring Diagram Car Radio Battery Constant 12v+ Wire: Red/BlackCar Radio Accessory Switched 12v+ Wire: BlueCar Radio Ground Wire: ChassisCar Radio Illumination Wire: Red/YellowCar Audio Front Speakers Size: 6 1/2″Car Audio Front Speakers Location: DoorsLeft Front Speaker Positive Wire (+): Blue/WhiteLeft Front Speaker Negative Wire (-): Blue/YellowRight Front Speaker Positive Wire (+): BrownRight Front Speaker Negative Wire (-): Brown/WhiteCar Audio Rear Speakers Size: 5 1/4″Car Audio Rear Speakers Location: Side ShelvesLeft Rear Speaker Positive Wire (+): RedLeft Rear Speaker Negative Wire (-): GreenRight Rear Speaker Positive Wire (+): BlueRight Rear Speaker Negative Wire (-): Pink
From the factory there is no tweeters in the speaker system.
Ft
6x8
Front speakers Front Door: 6-3/4" factory speaker note Far rear speakers Rear Pillar: 4x6" factory speaker note