Want this question answered?
If it is bad, replacing it will help with the vehicles emissions and put out the check engine light.
The fuel pressure regulator on a 1994 Jeep Grand Cherokee is part of the pump module in the fuel tank.
These vehicles only run a one-line fuel system meaning that the fuel pressure regulator is part of the fuel sender--fortunately on these vehicles they combine the fuel pressure regulator and fuel filter into one assembly--which is changeable, but the fuel tank has to be lowered to be accessed--I assume the vehicle is starting hard when cold--common problem with these vehicles--if taken to a dealer mechanic, they will probably tell you replacement of the entire sending unit is necessary--which is not true--
39 to about 42 is what the regulator will put out
The fuel pressure regulator is generally located on the fuel rail. On Chrysler products it is located on the top of the fuel pump/sending unit and is part of the fuel filter. Or it is located in front of the fuel tank and above the rear axle.
A fuel tank pressure sensor is a device used to measure the pressure in a fuel tank.
fuel tank pressure sensor or fuel tank level sensor? fuel tank level sensor is attached to the fuel sending unit, fuel tank pressure sensor is on top of the fuel tank.
where is fuel tank pressure sensor
The fuel tank pressure sensor is located at the top of the fuel tank. The fuel sensor is best seen when the tank is removed and made to face down.
fuel pressure sensor is located on the tank
The fuel tank pressure sensor is mounted in the top of the fuel tank. The sensor can be removed through an access panel above the fuel tank.
how to replace fuel tank pressure sensor pontiac gran prix 1997
The fuel tank pressure sensor is actually the fuel pressure regulator. There is a sensing unit within the regulator.
The Fuel Tank Pressure Sensor on a Oldsmobile Bravada 2000 is on the top of the Fuel Pump Assembly.
The tank pressure sensor is usually located on the top of the fuel pump assembly.
The fuel tank EVAP pressure sensor is located on top of the fuel tank along with the fuel pump assembly.
The fuel tank pressure sensor is for the EVAP system. It has nothing to do with the fuel gauge sending unit.