0
What else can I help you with?
Why is there rattling in my rear end in a 2001 jeep grand Cherokee?
Bad shock absorber.Bad/worn shock absorber bushings.Broken exhaust pipe/hanger.Bad/worn sway bar links or bushings.
What is the grinding noise on the driver side wheel of a jeep Cherokee 2000?
I have a 2001 Jeep Grand Cherokee and it does the same thing. I called the dealer and they said it is most likely the sway bar link/bushings. I'm going to replace today and hope it works since it's an easy fix.
What does it mean when your Jeep starts jerking at or above 65 mph?
I have a 92 Jeep Cherokee that started doing the same thing. It turned out that the left front tire had lost a wheel weight and was out of balance. I put new shocks and dampner on it while I had it out of service. Best of luck. It could be a plugged fuel filter. Is it a surge type feeling back and forth like running out of gas?
What is the rattle underneath in the left rear corner of your 2000 grand cherokee?
Could be a bad shock absorber or shock absorber bushing. Could be bad bushings on the rear sway bar (if equipped).
What does it entail to change the sway bar bushings and end links in a 1997 jeep Cherokee 4 wd?
you will want to remove the stabilizer bar top link nuts making sure to note in what order they are assembled, (nut, washer, rubber bushung, etc). if you want to remove the links just unbolt then from the axle brackets. then take the stabilizer bar bracket bolts out and remove the bar from the jeep. then pull the brackets off the stabilizer bar and replace them. just repeat in reverse order for instalitaion. Time allowed for a first timer would be 1 to 5 hours depending on front and rear both. Remember to secure the jeep with the proper safety precautions.
When changing a Jeep Cherokee Rear Sway bar link is there spring tension on it that I should be aware of before unbolting it Should the car be on the ground or jacked up off the ground on axle stand?
If the Jeep is setting level there should be no tension on the rear sway bar. Also, it should not matter if the Jeep is on the ground. The sway bars on the Jeep Cherokee simply pass through a bushing and transfer force through leverage from one side to the other. hth
How do you remove sway link kit on 98 Jeep Grand Cherokee?
To remove the sway link kit on a 1998 Jeep Grand Cherokee, start by safely lifting the vehicle and supporting it with jack stands. Use a wrench to remove the nuts securing the sway bar links to the sway bar and the lower control arms. If the bolt spins while you try to remove the nut, you may need to hold it with a second wrench or use penetrating oil to loosen any rust. Once the nuts are removed, pull the sway links out from their mounts.
What would cause a grand Cherokee front wheel to make a banging noise when you turn the wheel or hit a bump?
I had a similar problem with my 2004 Jeep Grand Cherokee and it turned out to be my front sway bar bushings and front sway bar link. The sound was a large clunk sound when I went over bumps. After I got it fixed there were no problems.
Is it worth lifting a 2wd Jeep Grand Cherokee?
Why would be my question. *If for aesthetics only....it will ruin your fuel economy and add sway to the vehicle as it becomes more top heavy. I wouldn't do it.
What is a sway bar on a jeep used for?
So the Jeep won't sway side to side on turns. Also keeps the body on the frame more securely
Why is there rattling in my rear end in a 2001 jeep grand Cherokee?
Bad shock absorber.Bad/worn shock absorber bushings.Broken exhaust pipe/hanger.Bad/worn sway bar links or bushings.
Why does your car rock back and forth while driving?
Broken sway bar or sway bar links.
How do you replace the stabilizer sway bar link to 2003 Ford F150?
How do you install a rear sway bar on a 2003 f 150 4 wheel drive
How safe is it drive a 1997 Jeep with bad sway bar links?
not safe at all
What is Front shock on sway bar on Cherokee sport 1996?
Never saw a shock on a sway bar. A shock mounted to the steering linkage would be a steering stabilizer.
What is the cost to replace sway bar links on 2003 envoy XL?
$40 a piece for the sway bar links and $50 for labor
How do you reconnect Jeep sway bars?
To reconnect Jeep sway bars, first, ensure the vehicle is on a flat surface and securely lifted if necessary. Align the sway bar end links with the mounting points on the axle and the sway bar itself. Insert the bolts through the holes and tighten them to the manufacturer's specifications. Finally, check for proper alignment and movement before lowering the vehicle.
