0
It depends on the aplication. When measuring level in a tank containing condensible fluids like steam, there's a high problability to have condensation in the reference leg. To compensate for this effect, the reference leg must be filled with the same liquid that is in the tank. This liquid in the reference leg will apply a hydrostatic head pressure to the high side of the transmitter which will be equal to thenmaximun level to be measured.
What else can I help you with?
Can I use my FM transmitter to listen to AM channels?
If your IPod does not have an AM setting your cannot use it to listen to AM channels. You can use an FM transmitter for an IPOD to transmit music from your IPOD through your radio. Many of these will also charge your IPOD.
Should you use bass drum beater pads on bass drum?
Beater pads will make the drum head last longer. So if you like the head you got, use a pad.
Do you use sticks on a snare drum?
You use sticks, but a special pair of snare sticks. You do NOT want to use trap set sticks on a marching snare drum. If it's a trap set snare drum then you can use thinner trap set sticks.
What kind of amp could you use for an electronic drum set?
They actually make drum specific amps, so that's what I would use.
How many songs include a snare drum?
Any song witch has drumming in it will use a snare drum. it is one of if not the most important drum on the kit.
Why you use minus to zero range in drum level transmitter?
I refer to Steam Boiler drum level. It is actually - to some positive figure is the range. Generally the boiler level is maintained at mid point that is zero. The transmistter is differential type. (DP type) If the transmitter is with a specified signal out put of 4-20 mA, it sends out 4 mA at lowest level and 20 mA at highest level. At mid level zero it sends out 12 mA. Differential pressure is highest at actual lowest level and lowest at actual highest level of the drum. By keeping negative to positive range there is fair amount of analog signal on lower and higher side of the drum.
How to control temperature of surface of rotating drum when you can't use thermocouple because it is stationary?
Use a non-contact method such as infrared to measure the drum temperature, or mount a wireless, battery powered temperature transmitter to the drum.
How do you use the SFC?
use for industrise transmitter comnication
How do you use the word transmitter in a sentence?
In the oral communication process the speaker is the transmitter and the intended recipient is the receiver.
How do you balance the washing machine drum?
To balance the washing machine drum, ensure the feet are level on the floor, adjust the machine's leveling legs as needed, and avoid overloading the drum with too many clothes. You can also use a spirit level to check if the machine is balanced properly.
What instrument do you use while playing a bass drum?
You use the ... bass drum while playing the bass drum ... (?)
What are some effective ways to improve my bass drum technique?
To improve your bass drum technique, practice regularly with a metronome to build speed and accuracy. Focus on proper foot positioning and use a balance of ankle and leg motion. Experiment with different pedal tensions to find what works best for you. Additionally, work on exercises to strengthen your leg muscles and improve endurance.
How do you get belly drum and aqua jet on a azumarill in Pokemon brick bronze?
In Pokémon Brick Bronze, to get Azumarill to learn Belly Drum and Aqua Jet, you need to use the Move Reminder for Belly Drum. This can be done after Azumarill has evolved from Marill, as it learns Belly Drum at level 43. For Aqua Jet, you can teach it via TM or have Marill learn it at level 21 before it evolves into Azumarill. Make sure to level up and evolve Marill accordingly to have both moves.
How can you use transmitter in a sentence?
They used the transmitted to transmit the signals from the island they were stuck in. Transmitter here is an electronic instrument.
What cords do you use to receive sound from your tv with your wireless headphones and transmitter?
To connect your wireless headphones and transmitter to your TV, you'll typically use a 3.5mm audio cable or an optical audio cable, depending on the available ports on your TV and transmitter. If your transmitter has a 3.5mm input, plug one end into the TV's headphone jack and the other into the transmitter. For optical connections, use a Toslink optical cable from the TV's optical audio output to the transmitter. Ensure both devices are powered on and paired for optimal sound reception.
What drum kit does the Kooks use?
The Tama drum kit
What printers use drum and tone printing process?
Laser printers use a drum and toner.
