0
What else can I help you with?
Why freqvency in AC and Why not in DC Voltage?
In AC voltage, frequency refers to the number of complete cycles per second that the voltage alternates direction. This is because in AC voltage, the direction of current flow continuously changes over time. In DC voltage, there is no alternation of direction, so frequency is not applicable.
How many Volts is 60 Hz?
Hertz (Hz) is a measure of frequency, not voltage. It does not directly determine the voltage in a system. Voltage is measured in Volts (V) and can vary depending on the specific application or electrical system.
What is the mains voltage in Cyprus?
The mains voltage in Cyprus is 230 volts at a frequency of 50 Hz.
Can 50 Hertz multi tester be used on 60 Hertz 220 volts for testing voltage?
Any of the multi testers that I have come across are not frequency sensitive. I use a Fluke process meter and it can be used to measure frequency if that scale is selected. Voltage is voltage, amperage is amperage and resistance is resistance regardless of what he frequency is.
What is the electricity Hz in the UK?
The frequency that electricity is generated at in the UK is 50 Hertz.
What would be the 3 phase voltage on a frequency of 50 Hz?
Single phase and three phase voltages are not related to the frequency at which the voltage is generated. The frequency at which voltages are generated is governed by the speed of rotation of the generating device.
Why backing volt depends on the light frequency but not on the intensity?
Backing voltage in a photovoltaic cell depends on the light frequency because different frequencies of light correspond to different energy levels of photons, which can determine the voltage generated. However, intensity only affects the current generated by the cell, not the voltage. So, the higher the frequency of the light, the higher the backing voltage, regardless of the intensity.
How are FM signal generated?
There are several methods for generating FM signals but they all basically involve an oscillator with an electrically adjustable frequency. This type of oscillator uses an input voltage to affect the frequency of its output. For example, when the applied voltage increases, the oscillator output frequency increases and when the applied voltage decreases, the oscillator output frequency decreases as well. If no voltage is applied to the oscillator its output will be a signal at its centre frequency. The amount of frequency variations is deviated around the oscillators' centre frequency.
Relate the frequency of the generated voltage to the speed of the machine and the number of poles?
N=120f/P where N - number of rotations in rpm f - frequency in Hz and P - number of poles
What is relation between frequency and voltage of that frequency?
voltage and frequency both are different quantity.. don't mix it...
Frequency depends on voltage or current?
Frequency doesn't depend on either voltage or current.
What does BIL basic insulator level really mean and its differences with Impulse withstand voltage and power frequency withstand voltage?
BIL is basic insulation level as per you or in other words it would be "basic impulse level" which implies the limit up to which an insulator could withstand impulse due to lightning strikes. Impulse is generated on the insulation due to the high voltage surges and spikes due to lightning strikes. BIL is generally much higher as compared to power frequency withstand voltage. In other words BIL is lightning Impulse withstand voltage. Impulse withstand voltage is the voltage that is generated due to switching operation and it's much higher than power frequency withstand, but BIL or the lightning withstand voltage is a the voltage level that an insulation can withstand during surge or lightning strikes.
What is the effect of low frequency on the voltage?
The frequency would decrease the gain and increase the output voltage
Why should a prime mover's speed be kept constant?
As you asked the question and it was added it to the electrical category I am presuming that you are talking about electrical generation. The prime mover has to be kept at a constant speed. The speed of the prime mover governs the frequency of the voltage generated. As the load increases the engine will start to slow down. The engine's speed governor senses this drop in RPM, hence the drop in frequency, and increases the fuel supply to the engine by advancing the diesel engine's fuel rack. This action increases the engine speed and brings the generated frequency back to the required system frequency.Also as the load increases, the output voltage will start to decrease. The output voltage is controlled by the generator's voltage regulator. When the decrease in voltage is sensed by the voltage regulator, it increases the generator's field excitation voltage which will bring the voltage back to the required system voltage.These actions are going on continuously, balancing each other all the time the engine is running and the generator is producing an output voltage.
What is the mains voltage and frequency used in the united kingdom?
The mains voltage is 230 volts, and the frequency is 50Hz.
Why power generated with under frequency is harmful to the load?
Why power generated with under frequency is harmful to the load?Read more: Why_power_generated_with_under_frequency_is_harmful_to_the_load
Maximum generating voltage in world?
maximum generated voltage is 21KV
