0
ONLY if you can run a single wire along side the 2-wires. If not, running a 3rd by itself will cause the magnetic field of the wire to overheat (when they're run together, the magnetic fields cancel each other out).
Short answer: Probably not.
You cannot run a separte wire all by itself if the 8-2 is in a cable assembly. It isn't allowed by code. Technically you could run 8-2 cable, and then a separate #8 within a conduit, overheating will not occur and the wires do not cancell each other out when considering magnetic fields. It is however true that Phase A and Phase B have completely opposite magnetic fields, but overheating still occurs, this is why wires are derated when they are all run in the same conduit.
What else can I help you with?
What is difference between 10-2 and 10-3 wire?
The main difference between 10-2 and 10-3 wire is the number of conductors they have. 10-2 wire has two conductors, typically used for a hot wire and a neutral wire. 10-3 wire has three conductors, typically used for a hot wire, a neutral wire, and a ground wire.
3 wire to 2 wire plug?
To convert a 3-wire plug to a 2-wire plug, you would typically remove the ground wire from the circuit. This is not recommended for safety reasons as the grounding wire serves to protect against electrical shocks. It is safer to use a 3-to-2 prong adapter if you need to plug a 3-wire device into a 2-wire outlet.
Can you connect a 3 wire fan into a 2 wire supply?
Yes, you can connect a 3-wire fan to a 2-wire supply, but you will lose the functionality of one of the wires. Typically, the third wire on a fan is used for speed control or monitoring purposes. If you connect a 3-wire fan to a 2-wire supply, the fan will run at full speed without the ability to adjust it.
I have a red green and black wire and TV terminals marked 1 2 and 3 Which goes to which?
Look inside the holes for 1 2 and 3 and make sure they don't have a color on the inside.
What will convert Fe plus 3 to Fe plus 2?
fe+3=..............* .9 =fe+2
How can I convert a 3 wire light switch to a 2 wire configuration?
To convert a 3-wire light switch to a 2-wire configuration, you will need to cap off one of the wires and connect the remaining two wires to the new switch. Make sure to turn off the power before making any changes and consult a professional if you are unsure.
How can I safely convert a 2 prong outlet to a 3 prong outlet without a ground wire?
To safely convert a 2-prong outlet to a 3-prong outlet without a ground wire, you can use a GFCI outlet or hire a licensed electrician to install a grounding conductor.
How can I convert a 4-wire dryer to a 3-wire dryer?
To convert a 4-wire dryer to a 3-wire dryer, you will need to remove the neutral wire and connect the ground wire to the neutral terminal. Make sure to follow safety guidelines and consult a professional if needed.
What is the Advantages of 3 wire rtd over 2 wire rtd?
It is more accurate, a 4 wire is more accurate than 3 wire and 3 wire is more accurate than 2 wire.
How to convert a 2 prong outlet to a 3 prong outlet?
To convert a 2 prong outlet to a 3 prong outlet, you will need to replace the outlet with a new one that has a ground wire. This involves turning off the power, removing the old outlet, connecting the ground wire to the new outlet, and installing it properly. It is important to follow safety precautions and consult a professional if needed.
Can you turn a 14-2 wire into a 14-3?
The only way to change a 14-2 wire into a 14-3 wire is to physically remove the 14-2 and replace it with a 14-3.
Will a 2 pole wire work with a 3 pole plug?
A 2-pole wire will not work on a 3-pole plug. You will need to use a 3-pole wire on a 3-pole plug.
What is difference between 10-2 and 10-3 wire?
The main difference between 10-2 and 10-3 wire is the number of conductors they have. 10-2 wire has two conductors, typically used for a hot wire and a neutral wire. 10-3 wire has three conductors, typically used for a hot wire, a neutral wire, and a ground wire.
Can you Convert a single 220 line into two 120 lines?
Answer for USA, Canada and countries running a 60 Hz power supply service. Yes, but you will need to change the wire from a 2 wire cable to a 3 wire cable. This allows the neutral to be brought out to the load.
How can I convert a 3 wire 220V electrical outlet to a 110V outlet?
To convert a 3-wire 220V electrical outlet to a 110V outlet, you will need to rewire the outlet and change the circuit breaker. This involves connecting the neutral wire to the ground wire and replacing the outlet with a 110V outlet. It is recommended to hire a licensed electrician to ensure the conversion is done safely and correctly.
What is the diagram for converting a 4-wire 220V connection to a 3-wire 220V connection?
To convert a 4-wire 220V connection to a 3-wire 220V connection, you will need to remove the neutral wire and connect the ground wire to the neutral terminal. This diagram shows the proper wiring configuration for this conversion.
Explain the comparison between dc 2 wire system and ac single phase 2 wire system and ac 3 phase 3 wire system and ac 3 phase 4 wire system?
of all of dem 3 phase 3 wire is most economical as it uses less conductor dan in 4 wire system, 3 phase 3 wire is used in transmission and 4 wire in distribution as it has 3 live and one neutral wire. 3 phase needs lesser conductor size than 2 phase 4 wire for the same power. 3 wire dc feeder is more economical than 2 wire dc feeder for the same power. that was all i cud get..... hope u find it a lil helpful.
